Projects who has pics of six 97 carb linkage?

I'm having a hard time figureing out how set up the six duce linkage 0n my blower, there is no instructions.

 

What kinda intake do you have i have 6 94's on a 671 blower

 

I have six 97's with a weiand blower top, and elco ball bearing linkage.the carbs in the picture are my old ones.

 

my linkage

 

You have to buy the carb linkange extender's for the p***eger side carbs i dont think you linkange will work like in the package you have to modify it

 

My linkage runs all on the drivers side of the carbs

 

I am planning to run this....


6 x 2 Progressive
Holley & Stromberg 2 barrel carbs.
This kit is made to be fully adjustable. It can be configured to fit just about any application. All aluminum & stainless steel with zinc plated mounting plates.
Ball Bearing No.2087...............$199.99

from here: http://www.forwhatyouneed.com/carburetor_linkage_progressive.htm



on my Lincoln (MEL) 430 with a 6x2 Edelbrock intake!

​

 

Are you planning on going progressive? or all together?

 

I'm running all six at once.

 

Here! In the pic the rear linkage is hanging, if you notice the two bolts , bolt directly in the back of the blower. You can still buy bell cranks that use the same bearing mount with muti holes in it. You can still buy the center link shaft, with the dual ends. I'd send back that EElco set up and just buy there ends.

 

Sellers Top,,
P.S in the pics, the rear carbs have stock shafts.. link for the center bearing
http://northcentralspeedshop.com/products/index/5/0/carb

 

Thanks for the pictures .