lets see some 41-46 chevy pickups

i have a 41-46 chevy pickup and im looking for pics of them so i can see whats missing from mine.so could u post some pics of them to help me out thank uall.

 

its missing the front finders and grill and the frame.my plans for it is to build a frame and put a ford front axle and 9-inch ford rear and ford moter and trans.its channeled about4-inches and im going to chop it about 4-inches.and shorten the bed about 2 feet.with 16x5.5 wheels on front and 15x7 or 8 on the back.motor is going to be a ford fe 390 with ether a 4-speed or c6 auto.with 3.50 or 55 gears in the back axle

 

Sounds just like mine, except mines an Aussie Chev Body.

 

kool truck

 

As i found my truck

 

my 46

 

This chassis and body are complete but the body is scattered around the yard and shop.

[/IMG]

[/IMG]

[/IMG]

[/IMG]

Then here is my friends truck I am helping him work on. It has been chopped 3" and the cab has been stretched 6"

[/IMG]

[/IMG]

[/IMG]


Kevin
LFD Inc.

 

Man nice job/ what did u use for thoes air lines?

 

The lines are just Napa hard lines in the stick form. Then I have a nice blue point hand bender and a sweet hand held hydro flare kit. These turned out ok for a truck that you will never see under. It was a quick job for a friend but if you take your time it can turn out like art work. I will try and find some pics of my nice work.

Kevin
LFD Inc.

 

my '46 one ton. just as i drug it home, except now the 216 is unlocked and as soon as the weather clears a bit gonna get it fired and start driving it to work. second pic is photoshop fun, i wasn't going to chop it but man with that 9' bed it looks killer.

 

Here is mine. I sold it last summer and it went to France.

 

This is my 41 GMC as it looked when I bought it a couple of years ago. Sorry for the poor quality pics, I don't have anything recent.

 

Nice job on that stretch Kevin. I'd love to see a detailed tutorial on that process.

 

Heres a buddies that should be out this spring.

 

took this pic at the Paluse Wa. show this summer, this truck is bad ass.

 

I did this a couple of years ago.
Last I heard was that it was being built.

 

I'm not a big fan of these trucks being cut down into rods, but I have to admit, this one has a great look! Can you share with us who is building it?

 

This one is quite similar to the direction that I am going for on my truck. I built this model of my truck so I could work on the overall look. sorry if you've seen this pic before, I promise I won't post it again.