Lets see Hot Rods with a Quick Change

scooter shes lookin fine!

 

my 29 with a torrance ca. hali

 

Here is a picture of my Coupe with a Halibrand Champ. Also have an NOS Champ with center section, cover, and end bells for 3" axles. Also have quite a few NOS Champ gears so I can go from 2:50's up to high 6's.

 

here's the rearend on the B-Line

 

Winters V-8

 

mine

 

a oldie

 

I don't think it's ugly at all. Nothing wrong with a QC capable of handling serious horse power.

Here's the Speedway Engineering Champ in my roadster. I agree. I can't imagine driving a hot rod without hearing some gear whine.

 

not a great shot...but here is mine.It`s a Spadaro unit in a `39 rear.I got it with the open drive option for the T5.It`s mounted via A spring and P&J ladder bars....`scuse the mess!!

 

Here's a shot of the Halibrand in my roadster when it was going together a few years ago.

 

I have had this Halibrand sitting around for a number of years
It now lives in my 3 window

 

Here's mine.

 

Despite the location, they're the cherry on top IMO.

 

Here's mine

 

Here's mine;

 

Frankland Quick Change.

 

Speed Demon banjo conversion

 

Here is a pic of my street roadster trunk floor with a quick change under it.

 

Hot Rod Works is one of the best out there!!

 

Street driven '64 Galaxie Custom done vintage Nascar style. The "Quickie" is full floating Frankland:

 

Just getting started.....

 

Winters/Spadaro V8 with '40 internals

 

Heres mine..

 

Here's a few of my Halibrand Champ.

 

I think when I get the floor pan cut and the body sitting where it should and the right tires & wheels this will look ok

 

Kiwi Quickchange!

 

i picked up a franklin to use on my willys .but its to long is it possible to buy shorter axles for theses so i can narrow it up ?

 

Mine- Winters/Spadaro

 

Mine in my current AV8 project. It's an old polished Halibrand culver city...

 

from the Hunnert Car Pile Up '07, in the parking lot.