52 Dodge brake issue

I need some Mopar help......again. 52 Dodge Coronet. alright, Rebuilt the master cylinder, put it all back together, bleed all 4 corners but still barely any pressure. they engage but at about an inch from hitting the floor. Everything is stock. Is there a way to adjust the shoes at the wheels? cuz I couldnt see one. there is an adjustment on the rod end of the master and a adjustable stop bolt on the pedal, think that would help? Any help is always greatly appreciated

 

come on fellas, I know your out there

 

I'd start with shoe adjustment. The fronts, done properly, are time consuming, as they need dis***embled and slots cut in the adjusters, then you have to work the co**** and fine adjustments of each shoe separately. The rears are a little easier.

 

Here you go:
http://http://www40.addr.com/~merc583/mopar/p15pdf/brake.pdf