Register now to get rid of these ads!

Impact racing

Discussion in 'The Hokey Ass Message Board' started by budssuperpro, Mar 26, 2010.

  1. URY914
    Joined: Feb 2, 2010
    Posts: 58

    URY914
    Member

    You're a few days late. There is already another thread about this.
     
  2. BobG
    Joined: Oct 22, 2008
    Posts: 350

    BobG
    Member

    Your a bit late on the Impact thread because it was dismissed in Federal Court today (only one week after SFI made the complaint) and by the way you really need to know all the facts.





     
  3. metalshapes
    Joined: Nov 18, 2002
    Posts: 11,130

    metalshapes
    Member

    All the Impact Racing Threads are Merged into this one...
     
  4. Steel Coupes
    Joined: Jul 22, 2006
    Posts: 80

    Steel Coupes
    Member
    from Midwest


    Maybe you should read just above your post.....

    Impact did not "knock off" HANS clips, as stated above, they were SOLD fake HANS clips, along with Bell, Simpson and Arai. From Georgia, where HANS themselves are located.

    These HANS clips were found on Bell, Simpson and Arai helmets also by NASCAR, which obviously didn't come from Impact, since Impact has never sold a HANS clip, only installed them on their own helmets when requested.

    So explain that.


    http://www.yellowbullet.com/forum/showthread.php?t=230944
     
    Last edited: Apr 1, 2010
  5. Dan Warner
    Joined: Oct 25, 2004
    Posts: 557

    Dan Warner
    Member
    from so cal

    There is some good news for users of Impact Racing Products. In light of the release of the joint agreement bewteen Impact and SFI the SCTA has revised their official stand on the use of Impact products at their events:


    Thursday April 1

    RE: UPDATE OF CERTIFICATION STATUS ON IMPACT RACING EQUIPMENT

    The following joint press release was announced by the SFI Foundation and Impact Racing, LLC today.
    Impact Racing has provided sworn testimony, that products bearing the SFI label produced in 2009
    and 2010, were manufactured to meet SFI specifications. The SFI Foundation has agreed to uphold
    the certification of products manufactured in 2009 and 2010. Products bearing manufacture dates
    prior to 2009 have remained decertified. The full press release can be viewed by following this link:

    http://www.sfifoundation.com/

    After careful consideration and investigation by the SCTA Technical Committee, inclusive of
    information exchanged with representatives from the safety certification organizations SFI and
    Snell, SCTA / BNI has decided to follow their recommendations. In plain English this is how this
    decision may affect you. If you currently own any of the decertified Impact Racing products listed
    below with manufacture dates prior to 2009, you will be required to replace them with a non-Impact
    product or Impact product with a manufacture date of 2009 or 2010, prior to competing at an SCTA-BNI
    event.

    3.2A Driver Suits (3.2A/1, 3.2A/3, 3.2A/5)
    3.2A Driver Suits (3.2A/10, 3.2A/15, 3.2A/20)
    **
    3.3 Driver Accessories:
    Arm Restraints
    Shoes (3.3/5)
    Drag Boots (3.3/15, 3.3/20)
    Gloves (3.3/1, 3.3/5, 3.3/10, 3.3/15, 3.3/20)
    Harness Pads
    Helmet Supports
    Hoods/Balaclavas
    Socks
    Underclothing
    **
    16.1 Driver Restraint Assemblies
    16.5 Stock Car Driver Restraint Assemblies *

    Other Impact products not listed MAY also be under scrutiny and may be decertified at any time
    in the future. Impact manufactured helmets ARE NOT decertified at this time. However, if the helmet
    has an SFI certification tag for the nomex interior or balaclavas, then you will be required to
    use an additional nomex head sock, manufactured by another company, with a SFI certification
    tag attached.

    For specific questions please contact:

    Lee Kennedy, Technical Director
    SCTA - BNI
    Lee.Kennedy@AVMetrics.net
    805.421.5056 Ext 113(O)
    818.519.6896 (C)
    WWW.SCTA-BNI.org

    Steve Davies, Chief Car Inspector
    SCTA – BNI
    flyingkiwi97@aol.com
    (714) 671-9454

    Van Butler, Motorcycle Committee Chair
    SCTA – BNI
    catherinejuneau3@mac.com
    (949) 497-6478
     
  6. Racewriter
    Joined: Nov 14, 2008
    Posts: 780

    Racewriter
    Member

    Nonsense.

    If it were that way, the SFI would have issued a blanket recertification of all Impact products. What happened is that Impact quietly admitted that they played fast and loose in 2007-8, and that they played it straight again starting in 2009. SFI isn't in the lawsuit business, they're in the safety certification business. Impact made a quiet admission of past wrongdoing and saved their company.

    Up your own ass a bit, are you?
     
  7. Steel Coupes
    Joined: Jul 22, 2006
    Posts: 80

    Steel Coupes
    Member
    from Midwest


    Again, you don't know what you're talking about......the suits were made wrong because an employee changed the design unbeknownst to anyone, and was fired for it.

    When you run a huge business with hundreds of employees, you can't control what they do 100% of the time.
     
  8. Racewriter
    Joined: Nov 14, 2008
    Posts: 780

    Racewriter
    Member

    Keep 'em coming. Your excuses get funnier with every post. Impact was duped by someone faking HANS clips (and the clips in question were made offshore, NOT in Georgia), they accidentally bought fake SFI patches (when in fact the only source for SFI patches is SFI), and now some rogue employee fucked up the suits. I love good fiction.
     
  9. Steel Coupes
    Joined: Jul 22, 2006
    Posts: 80

    Steel Coupes
    Member
    from Midwest

    You'll see when the results of the lawsuits come down.

    Obviously you love good fiction since it's all you write.
     
  10. RodStRace
    Joined: Dec 7, 2007
    Posts: 5,624

    RodStRace
    Member

    Steel Coupes, you have mentioned a couple things I have not found elsewhere on the 'net.
    I will say that IF your version is correct;'

    1. Impact made suits that were wrong. They did not fix the problem until SFI forced it.
    2. You mention that "You'll soon see the connection between the suit recall, the SFI tags and the HANS clip deal". Why is it that Impact, if they had knowledge of the problem, didn't do the right thing and do something before SFI pulled all this out into the harsh light?
    3. Bill S. is the head guy. The buck stops at his desk. Sure every big company has employee issues, but when issues arise, steps to correct the problem must be taken. 2 years of no tags problems indicates that time has passed without corrections being made.

    Even if this is a giant "Kill Bill" conspirasy and he is providing a great product that is being undermined internally and held to a higher standard than others due to egos (which there has also been much said), who would be willing to purchase anything from someone who Big Brother is gunning for?
     
  11. wfbgal
    Joined: Apr 1, 2010
    Posts: 1

    wfbgal
    Member
    from Wisconsin

    April, 2010

    JOINT PRESS RELEASE

    April 1, 2010 - Impact Racing, LLC and SFI Foundation, Inc., in the litigation pending in the United States District Court for the Southern District of Indiana, have agreed that:

    1. Impact Racing, LLC has provided sworn testimony that, upon review and investigation, no counterfeit SFI Conformance Labels have been used on Impact Racing products during the production years of 2009 and 2010.

    2. Impact Racing, LLC has provided sworn testimony that, upon review and investigation, all Impact Racing products manufactured and sold during the production years 2009 and 2010 meet SFI specifications.

    3. Based upon this sworn testimony, the decertification against Impact Racing products for the production years 2009 and 2010 is lifted. The decertification of the production years prior to 2009 and 2010 remains in effect. The parties will continue to work cooperatively in an effort to resolve the issues relating to decertification in these years.

    4. Impact Racing stands behind the safety of all products it has manufactured and to which SFI Conformance Labels have been affixed. SFI will continue to monitor compliance with product specifications.

    5. Impact Racing, LLC and SFI Foundation, Inc. will cooperate in determining whether any Impact Racing product bears a counterfeit SFI Conformance Label and if any safety issue exists in regard to products manufactured prior to 2009 and 2010.

    6. If any Impact Racing product does not bear the date of manufacture the purchaser or user is instructed to immediately contact Impact Racing who will provide verification of the date of manufacture. Impact Racing, LLC will immediately notify SFI Foundation, Inc. of this occurrence. Impact Racing, LLC and SFI Foundation, Inc. will work with the sanctioning bodies to determine the best method for product users to present verification of the date of manufacture.
     
  12. Larry T
    Joined: Nov 24, 2004
    Posts: 7,891

    Larry T
    Member



    Wouldn't this be grounds for a lawsuit. I'm not big on lawyers and such, but......
    Larry T
     
  13. Beef Stew
    Joined: Oct 9, 2008
    Posts: 1,253

    Beef Stew
    Member
    from So Cal

    The threads got merged together so I dont really know who you're referring to here but I am a SCTA tech inspector and have been dealing with problems with impact since last year. The more I hear about this BS the less I trust impact.
     
  14. Beef Stew
    Joined: Oct 9, 2008
    Posts: 1,253

    Beef Stew
    Member
    from So Cal

    According to sfi impact knocked them off. Are you suggesting that sfi is lying? Did you forget about the impact fire suits that did not meet sfi specs but had sfi patches on them? Maybe you can explain that one for all of us.

    Also, you seem to be the only one with this info about bell and simpson. You haven't shown anything that supports what you're saying. BTW the douche bags on yellowbullet are a bunch of fucktards. Talk about a waste of bandwidth...
     
  15. That has alrady been posted. And please read the rules of participating in this forum by posting a profile and an introduction. Thanks for playing
     
  16. The plot thickens, but all I see in the joint agreement is clarification or understanding that this issue happened before 2009. A lot still needs to be done and maybe some final agreement will be reached for the allegations prior to 2009, but it appears to me that SFI still thinks Impacts hands are dirty prior to 2009.

    I wonder if there are penalty provisions (fines, probation, or restricted operations including such things as SFI oversight requirements at company cost, etc.) in SFI's rules. That might be the logical resolution and allow Impact to pin it on an ex-employee without putting Impact out of business. But if a systemic problem is found where people were directed to do wrong, it could get messy. Well messier.
     
  17. Hotrod7
    Joined: May 21, 2009
    Posts: 155

    Hotrod7
    Member

    Ran full impact gear during my championship season 2007 in wingless sprintcars, All their stuff is of immense quality in my opinion, everything held up great even after a nasty write-off flip at the end of the season. Which is more than I can say for my last simpson brand Vudo helmet that cracked to shit all around the Hans device mounting tabs after a tommy-tipover.

    Either way, sad to hear about all this, im sure it'll all work out in the end.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.