Register now to get rid of these ads!

Help!!!Trying to save a Devin race car body. what's it worth?

Discussion in 'The Hokey Ass Message Board' started by Hitchhiker, Apr 3, 2010.

  1. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    Hey guys. I ran across a Devin body race car body today. It's really rough, but I think fixable. It's been chopped in half for storage. Sorry, no pictures. I didn't have my camera. I'm trying to save it from certain destruction. Are these things worth anything? I know that they are really rare, and I think I can get a good price on it. I don't want to keep it. But I would like to save it and p*** it on to someone that wants it. I just don't want to overpay and be stuck with it. Any idea on a fair price?
     
  2. spobanz
    Joined: Nov 15, 2009
    Posts: 78

    spobanz
    Member

    I know they are all over the board on price, obviously race history adds a lot of value and the original engine config adds value depending on what it had - a SBC vs VW for example. If the engine is gone, I don't know if you can tell what it had? I have seen them under 10k and over 100k. They are neat, I think Jalopy Journal had a write up about them not too long ago.
     
  3. its worth saving thats about all i can say
    if your going to turn it pay as little as possible
    if your going to keep it get a price where both of you feel like you got screwed and oyu will be ok
    tk
     
  4. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    It's just a body. No frame or anything. It's been dis***embled since the late seventies. It's the front engine set up.
     
  5. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    yeah, I'm not really trying to turn a profit. Just save it. I'm gonna offer him a few hundred and see what he says.
     
  6. Special Ed
    Joined: Nov 1, 2007
    Posts: 8,661

    Special Ed
    Member

    You got it. That's about what I would think it's worth....:)
     
  7. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    Cool thanks. I mainly don't want to piss him off by low balling him. If it was worth 10,000 in really ****py shape and I offer him $200 and he telsl me to get losted and tosses it. well that would ****. :p
     
  8. Asphalt Outlaw Hero
    Joined: Dec 9, 2006
    Posts: 963

    Asphalt Outlaw Hero
    Member
    from Dixie

  9. screwball
    Joined: Mar 5, 2001
    Posts: 1,763

    screwball
    Member

    What are his options sell it to you for a accepted price. For him to sell it to some one else if he wants to do the leg work. Or trash it. His body his call. Whats certain destruction?
     
  10. fab32
    Joined: May 14, 2002
    Posts: 13,985

    fab32
    Member Emeritus

    Just from your opening post I doubt that you'll offer him enough to get it. Sounds like the kind of project that need some p***ion behind it to make this deal and in this case it should be the guy who is going to bring it back not an inbetween man.

    Frank
     
  11. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    Yes, similiar.
     
  12. noboD
    Joined: Jan 29, 2004
    Posts: 8,979

    noboD
    Member

    From what I know they were made for several differant ch***is, differant wheel bases. Ask Metalshapes, I think he has one. Save it if you can.
     
  13. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    Well, it's currently sitting in a pile of chopped up junk fibergl*** boats. I went and bought an engine/outdrive from him and noticed the body. I asked about it. he told me what it was and how long it had been there. He said make me an offer. I'm "clean up" I think if I don't get it, no one else will.

    I agree I definitely don't have the drive for rebuilding it. But I think the old timer is starting to like me. I helped him move some stuff around the property and spent a day with him just hanging out and shooting the ****.

    I just want to save it.
     
    Last edited: Apr 3, 2010
  14. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    it's about 85 inch wheel base from what I can guesstimate.
     
  15. crash11049
    Joined: Aug 31, 2009
    Posts: 136

    crash11049
    Member


    what is that a joke? lots of projects would never see the light of day if it were not for the "inbetween man"
    And as far as p***ion it sounds like he has plenty, for even thinking about making it available to a person that would want it.
     
  16. screwball
    Joined: Mar 5, 2001
    Posts: 1,763

    screwball
    Member

    Sounds like any offer should be cool. Is there a price on used fibergl***.
     
  17. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    I don't think so. He just had a bunch of boats he was parting out. If you were from the PAC. NW you would know that this is where old boats come to die.:D

    I think he was just tired of tripping over the devin body and figured it could go with the rest of the fibergl*** when it gets hauled out of there.
     
  18. Blue One
    Joined: Feb 6, 2010
    Posts: 11,511

    Blue One
    ALLIANCE MEMBER
    from Alberta

    As far as fibergl*** goes, I'm not sure if it's being recycled in your area, if not the landfill gets it :eek:
     
  19. metalshapes
    Joined: Nov 18, 2002
    Posts: 11,130

    metalshapes
    Member

    I dont have one.

    But I knew one that got sold 14 years ago for $350.

    It was rough too( also just a bare body), I brought it to the new owner and parts started ripping and falling off on the way over there.

    And if I remember correctly, it was missing the trunklid.

    It had been on a Triumph ch***is.
     
  20. noboD
    Joined: Jan 29, 2004
    Posts: 8,979

    noboD
    Member

    Metalshapes, you seem to have a bunch of other cool road race cars, I thought I membered you haveing one of these. Whatever, it shouldn't be dumpster food.
     
  21. The37Kid
    Joined: Apr 30, 2004
    Posts: 32,493

    The37Kid
    ALLIANCE MEMBER

    There are several different types. I had one years ago that turned into college tuition money for my daughter. The doors came in different lengths to fit different wheelbase ch***is. Run an ad her on the HAMB or supprise yourself with an eBay auction.
     
  22. I am interested in that Devin. Got an A frame you might need!
     
  23. THE SPEED ADDICT
    Joined: Mar 31, 2007
    Posts: 355

    THE SPEED ADDICT
    Member

    Looks to be a Corvair ch***is Devin SS.

    The Corvette ch***is Devin SS is a lot longer.

    There was a running Corvair Devin at IOLA swap about 10 years ago, and it was for sale for $3,500. It was the same as the picture above, but red in color. I was thinking of making an offer, and I wish I would have!
     
  24. metalshapes
    Joined: Nov 18, 2002
    Posts: 11,130

    metalshapes
    Member

    Yeah, it should be saved.

    They are cool...:)
     
  25. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    we'll talk and Just so everyone is clear. TMAN pm'ed me first about this and has first right at refusal.
     
  26. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    I think the one I am looking to save is meant for a spitfire ch***is
     
  27. canadaclass
    Joined: Nov 18, 2012
    Posts: 2

    canadaclass
    Member
    from Canada

    So, many years later... what ever happened to the devin body?
     
  28. Hitchhiker
    Joined: May 1, 2008
    Posts: 8,507

    Hitchhiker
    Member

    @canadacl*** As far as I know It's still sitting right were I saw it last. he won't part with it. I'll just buy it at his estate sale in 20 years along with all the other **** he's got that I want.
     
  29. Some guys have a real problem with folks who save and flip cars for some bizarre reason, they don't seem to understand that without those guys a lot of cars would otherwise just get s****ped and the rest would get priced out of the ability of the average joe that doesn't have money falling out of his *** to have a project of some sort.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.