lakewood bellhousing info needed

the bellhousing is for my ford 5.0 motor, it bolts up fine but the bolt pattern for the transmission isn't the same as a T10 or a T5 which is what I have. Does anybody recognize this bolt pattern?

 

How about a picture of the front of the T5 and T10 you have?

That bell housing has the Muncie/Saginaw/GM type pattern. Unsure if it has a formal name.

Your T5 and T10 may have the Ford pattern.

 

Can't really say what bolt pattern it is by looking at it but seein' that it's for a Ford 302 maybe the pattern is for an older toploader 4 speed.

 

I am with Gimpyshotrods, That looks like a gm polt pattern for the ******. Lakewood made adapter bellhousings but usualy it was ford ****** to gm motors

 

It looks like the same bolt pattern as mine and it`s for a toploader 4 speed . If you want to check for sure PM me . And we can get together & check it out I`ve got an empty toploader case to check it by. G***erman

 

The nice thing about that bell housing, and most bell housings from Lakewood, is that the flat area is freakin' huge, so it may be possible to re-drill it to match your pattern.

You will want the register hole to fit the bearing collar precisely, so a spacer might be needed if it is smaller, or light machining if it is larger.

 

Yeah both are Ford transmissions the T10 is from a 64 Comet and the T5 is from an 87 Mustang GT

 

There should be a number stamped on the bellhousing and if you look at the Lakewood web site and match the number you will know all about it.