Register now to get rid of these ads!

-------"nelson boys" --------Model A update -7 pix

Discussion in 'The Hokey Ass Message Board' started by sodbuster, Jan 9, 2005.

  1. sodbuster
    Joined: Oct 15, 2001
    Posts: 5,066

    sodbuster
    Member
    from Kansas

    Well we picked up a Model A last weekend and drug it home and change the wheels and tires. I have been greasing and getting everything loose for this weekend. I wanted to see if we could get the ole' gal fired up. So I pulled the head earlier in the week to find it full of a mouse nest. So clean/shopvac-ed it and soaked it in Marvel Mystery Oil and everything loosend up. So I got the wire brush on the drill and "Polished" the head while my dad "Honed" it with fine grit sand paper. We got the head back on and check the starter and it needed a little oil also, got it back installed. I borrowed a few items from my pops Model A roadster p/u and I cranked it about 4 times and "clackety/clackety/clack" it runs. So we tried it a couple more times while laughing and hooting. So we decided to take it on a cruise out of the garage. I drove her about 50 feet to the end of the driveway (no brakes) and backed it back in to the garage. My dad also drove it and backed her. We both had chicken skin on are arms after words and cracked open a "Beer" and toasted the day. Here are a few pix of the days events. Oh yea, and we started on it around 11am and she fired around 3pm.



    Engine full of stuff.....

    [​IMG]


    Got the Head back on with the ole' Model A book...Question: How much do you torque the heads on a Model A?
    [​IMG]

    First fire and yes Rocky she did smoke from MMO on the valves......hahaha.

    [​IMG]

    Me pulling her out of the garage....
    [​IMG]

    The acorn's that puked out of the exhaust all over my SBC when it fired up.......hahaha.....I had to take a pix.
    [​IMG]


    Smoking while backing up......
    [​IMG]

    Ya' gotta drink a beer after the ole' gal comes back to life.......


    [​IMG]

    Chris Nelson
    Kansas

    Click here for last weekend's pix........
     
  2. I can hear Dr. Frankenstein now....."It's alive, it's alive !"
    [​IMG]
     
  3. slammed
    Joined: Jun 10, 2004
    Posts: 8,150

    slammed
    Member

    Great work. Amazing it would run. Cool post.
     
  4. jangleguy
    Joined: Dec 26, 2004
    Posts: 2,668

    jangleguy
    Member

    Chris - It just don't get any better than that, eh? Didn't even get an acorn or mouse turd in your eye? Congrats. Not a shabby A-bomb you boys have there - will you have it in the nines by MoKan???
    Tell your dad HI for me,
    Scotty
     
  5. bills model a
    Joined: Aug 27, 2004
    Posts: 305

    bills model a
    BANNED

    man i would have bought the beer to see that
     
  6. JimC
    Joined: Dec 13, 2002
    Posts: 2,243

    JimC
    Member
    from W.C.,Mo.

    "Happy Days"
    Why are you and your dad grinning?
     
  7. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,960

    Roothawg
    Member

    You guys have the luck of the Irish.......
    Neat car.............
     
  8. Mo Junk
    Joined: Sep 24, 2003
    Posts: 154

    Mo Junk
    Member

    That's a good way to spend a Winter day. Sam
     
  9. Levis Classic
    Joined: Oct 7, 2003
    Posts: 4,066

    Levis Classic
    Member

    Looks like a good time
     
  10. BUICKS38
    Joined: Sep 2, 2002
    Posts: 296

    BUICKS38
    Member

    What a great way to spend a day. You and your dad working together. Then to get it fired up to. Sounds like a 12 pack day to me. I guess the mice did not like it much [​IMG]
     
  11. Boones
    Joined: Mar 4, 2001
    Posts: 9,689

    Boones
    Member
    from Kent, Wa

    Cool that is fired up and moved under its own power
     
  12. ABone312
    Joined: Aug 28, 2003
    Posts: 445

    ABone312
    Member

    Less than $200 for a complete Model A sedan, and in 4 hours it's running, you lucky son of a *****!! [​IMG] [​IMG] [​IMG]
     
  13. 36couper
    Joined: Nov 20, 2002
    Posts: 2,014

    36couper
    Member
    from ontario

    Fix the brakes, get some headlights and drive the **** out of it!
     
  14. Dirty2
    Joined: Jun 13, 2004
    Posts: 8,902

    Dirty2
    Member

    To cool !! Congrats !!!
     
  15. beatnik
    Joined: Nov 8, 2002
    Posts: 2,209

    beatnik
    Member

    That's great Chris, I can't believe you guys got it running in an afternoon considering what a deal you got. That totaly Rules! They must have driven that car right to where it sat until you found it.

    Gus
     
  16. hotrodladycrusr
    Joined: Sep 20, 2002
    Posts: 20,765

    hotrodladycrusr
    Member

    Thats GREAT Chris! Looking forward to seeing it run at the HAMB Drags this year! [​IMG] [​IMG]
     
  17. scarliner
    Joined: Sep 3, 2003
    Posts: 622

    scarliner
    Member
    from Macon Mo.

    Chris, wait 75 years and try that with one of the "JELLY BEAN" vehicles we have today! I still believe the old stuff,was simple,and at the same time tuff.Looks like you had a day to remember,but the rest of you guys beware! Theres several mice on the loose, looking for a new home!
     
  18. coupeHEAD
    Joined: Dec 19, 2002
    Posts: 1,159

    coupeHEAD
    Member

    Sodbuster, you torque the head to 55 foot lbs. Start at 45, then redo at 50, then finally 55. Drive it around to operating temperature then check them at 55 lbs again. There is a sequence to the torqueing. You'll need to get a Model A book with a good diagram on the sequence. Also don't use the gasket for the water filler neck, just use blue RTV silicone sealer. The torqueing with the gasket can break the ears off the filler neck. Keith
     
  19. Artiki
    Joined: Feb 17, 2004
    Posts: 2,014

    Artiki
    Member
    from Brum...

  20. attitudor
    Joined: Sep 28, 2004
    Posts: 3,134

    attitudor
    Member
    from Finland

    Great! Whack it down and hit the road man! I can almost smell that oil!
     
  21. [ QUOTE ]
    Fix the brakes, get some headlights and drive the **** out of it!

    [/ QUOTE ]

    I laughed at first but then started thinking....could you imagine ALL the people that would love to see that....Restorers, resto-rodders and even them "rat rodders" would be stopping you all the time wanting to buy it....tell them exactly what they do not want to hear.

    Tell the restorers that you gonna build a rat rod out of it the day it finally breaks down.

    Tell the rat rodders that you are going to restore it the day it finally breaks down.
     
  22. Kevin Lee
    Joined: Nov 12, 2001
    Posts: 7,675

    Kevin Lee
    Super Moderator
    Staff Member

    I don't say this too much because I think it's trite, but you should really chop the **** out of that thing. Leave the fenders, leave it stock height, but just hammer the dog**** out of the roof and drop the headlights down a bit. I think it would look cool anyway....and yes I think it's cool as it sits too.
     
  23. Terry
    Joined: Jul 3, 2002
    Posts: 1,824

    Terry
    Member

    That is one of the coolest things I have ever heard/seen.
     
  24. sodbuster
    Joined: Oct 15, 2001
    Posts: 5,066

    sodbuster
    Member
    from Kansas

    Yea, that is the plan. Just get it rolling and stopping and make everything "road safe" and drive the heck out of it. We were thinking about cutting the top off and making a touring out of it, maybe in the future. Kind of like that touring that was covered in old HOTROD covers, but I mentioned an idea to my dad about a "nose" with full fenders and it looks very cool.

    Top? what top. It has the old plywood top that is covered in canvas and roofing tar and about 3 layers thick. It did tear a sunroof on the p***enger side after it was on the highway. But I am going to leave it just as is. I do need cut some wood for bracing in the top (it only has one), looks like I will be making a roadtrip to St.Louis where my father-in-law has a full wood shop.

    Headlights? not right now. Taillights? Yes.

    So the next step is Brakes and getting the radiator hooked up and getting it ***led/tagged with insurance.

    Oh yea, I fired it up for the wife last night and I think I saw her grin. And then she asked if we could make it into a roadster and if it was going to Bonneville?

    Chris Nelson
    Kansas

     
  25. Chris, have I mentioned that was the most obscene deal I've heard yet? Good Job. Has the belly tank been put on hold?

    Farmall
     
  26. marq
    Joined: Aug 22, 2003
    Posts: 1,423

    marq
    Member

    i'm really hoping you aint gonna paint or chop that ,it wouold be so kool as is with a deep channel and maybe a zed to get her real low then go over the rust with a satin varnish.Hell yeah that would be real kool.....Marq
     
  27. straykatkustoms
    Joined: Oct 30, 2001
    Posts: 28,307

    straykatkustoms
    ALLIANCE MEMBER

    [ QUOTE ]
    We were thinking about cutting the top off and making a touring out of it, maybe in the future.

    [/ QUOTE ]


    [ QUOTE ]
    We were thinking???

    [/ QUOTE ]

    The Nelson Boys, are thinking about cutting the roof off?

    I thought that this would be automatic. I hate for you guys
    to miss out the joy of driving in the rain, heat, cold and smells of the open road.

    Come on Spring I'm going through withdrawals!!!!!

    Looking good guys keep us posted.

    Happy Trails,

    Mick
     
  28. SEWERMAN
    Joined: Dec 9, 2002
    Posts: 46

    SEWERMAN
    Member

    What a great story! Just one question, what the hell is chicken skin? Is this a new type upolstry?
     
  29. Rusty
    Joined: Mar 4, 2004
    Posts: 9,487

    Rusty
    Member

    MAn that is awesome. What a great feeling. So what are yalls plans for her?
     
  30. sodbuster
    Joined: Oct 15, 2001
    Posts: 5,066

    sodbuster
    Member
    from Kansas

    Chicken Skin is where get the bumps on your arms, or you can call it goose bumps.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.