Register now to get rid of these ads!

Hot Rods Has anyone used Vintique 32 ford running boards?

Discussion in 'The Hokey Ass Message Board' started by couverkid, Jan 30, 2010.

  1. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

    Has anyone used Vintique 1932 ford running boards? Do they fit good?
     
  2. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

  3. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

    anyone? just want to know before I buy them.
     
  4. Deuce Roadster
    Joined: Sep 8, 2002
    Posts: 9,519

    Deuce Roadster
    Member Emeritus

    I have not seen any ... so I cannot say anything about them.
    I have used Lobeck's running boards many times and the fit was always good.
    THEN ... Bob Drake came out with his.
    I called up LoBecks and ordered a set of their running boards ( wanting the LoBeck ones ) and they sent me Bob Drake ones :eek: After looking at the set of Bob Drakes ones I had just opened, I called Lobeck to ask WHY I got Bob Drakes when I ordered LoBeck ones ... they said it was easier for them to just sell Bob Drake ones than making their own :(

    The Bob Drakes were OK ... but they have Bob Drake stamped in the metal on them. I also believe the rubber looks old and dull ... a lot quicker ( not as BLACK )

    I will say that a LOT of the Vintique stuff does not fit very well ... and a LOT of their stuff is JUNK ... IMHO.
    But then ... most reproduction stuff is JUNK and does not fit as well as Henry's original stuff. :rolleyes:
     
  5. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

    Has anyone used them?
     
  6. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

  7. Karl Wescott
    Joined: Aug 29, 2007
    Posts: 87

    Karl Wescott
    Member

    While I have not actually fit a set of Vintiques (our roadster has V8 Shop/Lobeck's), we have sold several sets of Vintiques and have not had any negative feedback (or positive for that matter).

    Hope that helps.
     
  8. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

  9. Darrell T. Benner
    Joined: Feb 24, 2010
    Posts: 13

    Darrell T. Benner
    Member
    from California

    I'm looking at buying a set of '32 Boards and would also like to know if anyone has used the Vintiques?
     
  10. VAPHEAD
    Joined: May 13, 2002
    Posts: 3,257

    VAPHEAD
    BANNED

    I sold "couverkid" a set of the Vintiques.
    He told me he liked 'em.
    I do know the car is painted now...maybe he'll add some pictures !!?

    PM me if (anyone) wants a set.
    eriC
     
  11. green53ford
    Joined: Mar 4, 2009
    Posts: 206

    green53ford
    Member
    from Wisconsin

    I have not used thier running boards but i just installed a set of thier covers on a set of original boards. They were a pain to install but they look great when they are done.
     
  12. uncle buck
    Joined: Feb 13, 2007
    Posts: 1,985

    uncle buck
    Member

    I don't know about the Vintique boards, But I can tell you Lobecks recently did another batch of there own V-8 Shop boards. I got a set a couple months back and the looks and fit is nice.
     
  13. swifty
    Joined: Dec 25, 2005
    Posts: 2,462

    swifty
    Member

    How did you install the covers? Did you have instructions from Vintique?
    I inherited a set of Vintique covers with my project and being cheap would like to use them but my first effort was a failure. I used a contact adhesive (Australian brand) and glued the large area down leaving the ends for another day. When I got them out to finish off the ends I found that they hadn't stuck and peeled off real easy. What adhesive did you use and any tips on how to do it just the one time?

    swifty
     
  14. turtlesdove3
    Joined: May 27, 2010
    Posts: 10

    turtlesdove3
    Member

    If it's tough job to install it I'll need lots of patience. Don't they come with instructions? What I'm thinking is, how it'll look if I don't install it correctly?
     
  15. couverkid
    Joined: Mar 30, 2007
    Posts: 1,134

    couverkid
    Member

    I did install the running boards. Not the best but not the worst. Had to redrill all the holes to get them to fit good.Look good on the car.
     
  16. Can't help with the vintque boards,,but I have used 2 sets of Drakes and I'm happy with them. HRP
     
  17. VAPHEAD
    Joined: May 13, 2002
    Posts: 3,257

    VAPHEAD
    BANNED

    found a pic of the coupe.(couvers with the boards installed)
    can I have it? borrow it for a couple years maybe?
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.