Register now to get rid of these ads!

Projects 1955 plymouth

Discussion in 'The Hokey Ass Message Board' started by bottledViolence, Jun 17, 2010.

  1. bottledViolence
    Joined: Feb 19, 2009
    Posts: 172

    bottledViolence
    Member

    just got this 55 plymouth in a trade for my 48 plymouth coupe. almost no rust perfect floors and it RUNS. it needed a master cylinder which i have already replaced and someone converted the electrical and did a poor job so the lights dont exactly work.its got the origional 6 and an automatic trans.ive already started taking the chrome off the sides and removed the rear door handles and i plan on lowering the rear alittle and painting it flat purple with a white roof and cruise it all summer.last picture is the 48 about to get a new home...
     

    Attached Files:

  2. Nice trade! Have fun with it.
     
  3. farmer12
    Joined: Aug 28, 2006
    Posts: 7,724

    farmer12
    Member

    Looking good, love them Plym's!
     
  4. This is one I built two years back. Got the stance with 2" blocks and flattened springs in the rear, and a spring-maker modified my front coils to ride 3" lower.

    [​IMG]
     
    SintownKing likes this.
  5. mottly
    Joined: Jun 18, 2010
    Posts: 24

    mottly
    Member

    what a fantastic trade...nice :D

    rockabillyb***man - nice ride - you still got it?
     
  6. bottledViolence
    Joined: Feb 19, 2009
    Posts: 172

    bottledViolence
    Member

    so when i got the car it needed a "tune up" after new plugs it still ran rough the head came off and there were a few burnt valves and then i noticed a hole in one of the pistons SO looks like that engines coming out. since its coming out im just going to put a v8 in it
     
  7. 73RR
    Joined: Jan 29, 2007
    Posts: 7,342

    73RR
    Member

    Well, a Hemi would look right nice!! And the 360 are plentiful, but I would also suggest looking into a 400-440. Very few engines will produce the same torque at a bargain price..
     
  8. don't junk that six- lotsa guys around here would like to build it!!
     
  9. bottledViolence
    Joined: Feb 19, 2009
    Posts: 172

    bottledViolence
    Member

    i do plan on selling the engine since its complete and its got the auto trans.as for the v8 thats going into it.....a 302.i have the engine and its already built and is in a running car but said car has a rotted out frame.ill definitely get hated from the ford AND mopar guys
     
  10. George
    Joined: Jan 1, 2005
    Posts: 7,991

    George
    Member

    A 302 Ford is still better than a belly ****on engine! check out www.forwardlook.net
     
  11. Slow55
    Joined: Sep 20, 2009
    Posts: 112

    Slow55
    Member

  12. nice trade i love those taillights. so hard to find good unblemished marker/reverse light cones though
     
  13. I got a couple of good ones from Flattop Bob.
     
  14. Thanks ill shoot him a pm im putting set in my chevy
     
  15. bottledViolence
    Joined: Feb 19, 2009
    Posts: 172

    bottledViolence
    Member

    i finally got a little more work done.havent done too much cause its been hot as hell lately.i repainted the dash and cleaned up the chrome and cut all the door panels and vinyl and once i get to a sewing machine im gonna sew pleats in it all.with the dash out all the poor wiring can be fixed. now that the front ends off i started painting the firewall.
     

    Attached Files:

  16. bottledViolence
    Joined: Feb 19, 2009
    Posts: 172

    bottledViolence
    Member

    i also sent away for some lakes pipes dummy spotlights and some chrome for the engine.just picked up a devil shift knob and heres a shot of the intake that ill put on the 302
     

    Attached Files:

  17. Big Swede
    Joined: Sep 21, 2015
    Posts: 48

    Big Swede
    Member

    Whatever happened to this project? I do realize this thread is 6 years old lol


    Sent from my iPhone using The H.A.M.B. mobile app
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.