Register now to get rid of these ads!

1962 rampside corvair truck

Discussion in 'The Hokey Ass Message Board' started by truckncoupe, Jul 29, 2010.

  1. truckncoupe
    Joined: Apr 4, 2009
    Posts: 1,428

    truckncoupe
    Member

    Located a 62 Corvair rampside truck for sale, motor is not running good...valve or rod knocking owner said....truck is in real good shape, paint good, what are these things worth? :rolleyes:
     
  2. diamond dave
    Joined: Jul 18, 2006
    Posts: 458

    diamond dave
    Member

    there were a couple on here for a while. pretty cheap. my guess is, just like a vw, a running motor can make or break the price on them. check craiglook.com, and see what theyre going for. that's what i do when i need to see what something is worth. best of luck if you buy it, theyre cool as hell.
     
  3. codeblu
    Joined: May 11, 2006
    Posts: 606

    codeblu
    Member

    The guy I bought my Plymouth from has one with a 231 odd-fire V6 in it.
     
  4. AlbuqF-1
    Joined: Mar 2, 2006
    Posts: 909

    AlbuqF-1
    Member
    from NM

    I watch Vairs on eBay and the few I've seen in decent shape body-wise go for a good buck. Engine parts are no problem. I'd like one!
     
  5. need louvers ?
    Joined: Nov 20, 2008
    Posts: 12,901

    need louvers ?
    Member

    You might just check and see if that has a hydraulic lifter motor or solids before you go too far. I reanimated one for a customer at the end of summer last year that was a hydraulic motor, and until the lifters pumped up, it sounded like a rod knock. Pop a valve cover and rattle the rockers, if they informally have a small amount of lash, their solid. If they are tight, it's probably a hydraulic motor. Clean it up good, run some Marval Mystery oil through it and it might save. In other words, deal like it's junk!
     
  6. need louvers ?
    Joined: Nov 20, 2008
    Posts: 12,901

    need louvers ?
    Member

    You might just check and see if that has a hydraulic lifter motor or solids before you go too far. I reanimated one for a customer at the end of summer last year that was a hydraulic motor, and until the lifters pumped up, it sounded like a rod knock. Pop a valve cover and rattle the rockers, if they informally have a small amount of lash, their solid. If they are tight, it's probably a hydraulic motor. Clean it up good, run some Marval Mystery oil through it and it might save. In other words, deal like it's junk!
     
  7. Insane 1
    Joined: Feb 13, 2005
    Posts: 974

    Insane 1
    Member
    from Ennis TX

    Well I got 2 of them........ one will run, and is a very buildable truck, and the other has a ton of parts, or could be built...... See my ad in the cl***ifieds.

    You can have both of them for $1,400 bucks. Or give me something in trade!!!!

    You want my number?????????????

    I'll tell you the cars aren't worth ****.
     
  8. Insane 1
    Joined: Feb 13, 2005
    Posts: 974

    Insane 1
    Member
    from Ennis TX

    Well I got 2 of them........ one will run, and is a very buildable truck, and the other has a ton of parts, or could be built...... See my ad in the cl***ifieds.

    You can have both of them for $1,400 bucks. Or give me something in trade!!!!

    You want my number?????????????

    I'll tell you the cars aren't worth ****.
     
  9. kustomsrule
    Joined: Sep 18, 2009
    Posts: 300

    kustomsrule
    Member
    from L A

    Last year I bought one for $3,000. Completely rust free (they seem to rust out easily), needs paint (primered all over with different colors), weak engine (got half way home before it quit altogether), decent brakes and tires (but not good enough for me). The engine is being replaced with a rebuilt one now. I'm already in it for too much but that's OK 'cause I like the car. Buy the best one you can find; it's cheaper to buy 'em than to build 'em.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.