Register now to get rid of these ads!

Back from the Body Guy, an update on Fleetmaster's car

Discussion in 'The Hokey Ass Message Board' started by wayfarer, Jan 23, 2005.

  1. wayfarer
    Joined: Oct 17, 2003
    Posts: 1,789

    wayfarer
    Member

    Emilio's car came back from the body guy yesterday. It still needs to be block sanded to be ready for paint, but all the rust is now gone. Yesterday we redid the steering, since the body guy took it upon himself to replace the firewall and eliminated the mounting points that were there, and pulled the body off. Now, time to finish the ch***is.
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. That's looking good! Didn't you guys have a TrueValue universal firewall(tm) in that?
     
  3. speedaddict
    Joined: Sep 28, 2002
    Posts: 2,420

    speedaddict
    Member
    from Austin, Tx

    nice, what kind of primer are you guys using on that? Is that red primer high build?
     
  4. wayfarer
    Joined: Oct 17, 2003
    Posts: 1,789

    wayfarer
    Member

    Eric, yes we had the wheelbarrow firewall and the body guy changed it without asking about it. Kind of a point of contention. Because he filled the steering column hole, we had to redo the steering before we pulled the body, but it worked out well. The plan is to try to finish the ch***is this week, so we can slip in the 496 big block when it comes back from the engine builder. You should come by and see the thing. The red is some kind of epoxy that the body guy threw on there to protect the paint, he may actually run the car with it for this summer and then blow it apart for paint during the winter.
     
  5. fleetmaster
    Joined: Jan 21, 2004
    Posts: 168

    fleetmaster
    Member

    hey-thanks for posting those pics. ya-he sprayed two caots of primer on, then that red epoxy paint. we are doing some serious work on the ch***is and are making a ton of progress thanks to my bro (salcheeza) and wayfarer!
     
  6. Ken Carvalho
    Joined: Dec 22, 2004
    Posts: 1,611

    Ken Carvalho
    Member

    what spokane shop is the work being done at?
     
  7. Nick32vic
    Joined: Jul 17, 2003
    Posts: 3,064

    Nick32vic
    Member

    Lookin good guys! Whens the due date?

    Nick
     
  8. dondanno
    Joined: Mar 20, 2003
    Posts: 679

    dondanno
    Member

    Cool keep up the good work...Danny
     
  9. wayfarer
    Joined: Oct 17, 2003
    Posts: 1,789

    wayfarer
    Member

    The body guy is a local guy who works out of a shop behind his house. The ch***is work is all being done by us in the shop behind emilio's house. Approximate due date, sometime this spring. In the last two days, we've finished the shock crossmember, built a crossmember with a driveshaft loop and got the gas tank mounted to the body so we can put it on the ch***is and start working out the trailer hitch. After that, it's time to tear it apart and paint the ch***is. We'll get it done before too long.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.