procomp ignition

need advice, thinking of giving a procomp hei distributor a go ( i think there chinese) in my 348 w motor,anyone had a good or bad experience.

cheers

 

Junk

 

i put one into a 302 windsor that i built, it would play up at idle, then clear out higher in the rev range, or you could tune it to do the opposite. after tearing my hair out for ages , i finally s****ped the procomp ignition and ..tada, problem solved.
i would not recommend the stuff.

 

Buy a MSD and that will end your problems ! Good distributor !

Retro Jim

 

cant beat the msd setups for reliablity and performance i reckon.

 

thanks guys, my gut feeling was this was the case.

 

i happen to like mallory, but im not just old school, im getting old.

 

Definitely run with that feeling....that stuff is ****

 

I have one, but I put in a remote coil adaptor, pulled out the module and hooked the pickup straight to the spark box, and I put an advance kit it in, so there wasn't much of the chinese stuff left to screw up.