Another 250 inline 6 question

Well through all the post of searched and I do have books on building up an inline 6. Whats not all that clear is I have an offenhauser 3 single barrel setup. The books do have charts and diagrams of all other carb setups but this one. My question is which single barrel carb would be suitable for this app. The reason I ask is because I already have the intake and would like to use it I think it would look boss under the hood
Thanks.

 

rochester mono jets, found on almost all camaros. ive got the same intake on my 250. paid 15$ a piece for them and rebuild kits cost 7.50$$$

 

These are kinda was I was thinking I just wanted to be sure before I waste my time finding em and paying and spend the time rebuilding em.

 

The Rochester Monojet MV is what the linkage kit is designed for. There were alot of different versions of this carb made over the years. Mostly trucks, Camaros, and Novas. Make sure you get ones that are the same.

 

So your saying make sure I get the MV models or just all 3 the same?

 

I'm curious about this as well, but from the other angle. I have three Holley 94's that I want to mount on my Chevy 235 IL6.

Any thoughts if this is wise or just get a set of Rochester? ~ don't mean to highjack your thread Obsessed..

 

Not at all cederholm. What about the stromberg 97's anyone. Would these work as well

 

the 97s and 94s both have a three bolt base vs. the Chevy two bolt. Finding an adapter has been challenging, but I know they exist.

There is a beautiful triple 94 on Chevy IL6 setup in the Holley 94 group here on HAMB. Check it out.

Be aware, 97 are coveted and the prices reflect it. IM me when you make up your mind, I'd like to know what you decide.

 

I'll have to do a little more researching in this direction and see what I can find out then.