If I'm not mistaken you had this out at the Grand National Roadster show this year. Beautiful car, got me a few photo's of her.
Seen this at Sacramento last weekend. not a straight axle ..... but cool as hell and sounded nasty. Lic plate(Wedge Wagon)
"G***er" is getting to be one of the most overuesd and mis-used terms ever here on the HAMB. A "g***er" is an actual 'gas-cl***' compe***ion car... either an original survivor or at least, a 'true to life' replication of an actual gas cl*** compe***ion car. Not to dis any of the cars posted so far or the work that went into them, but not one of them is an actual g***er. Street freaks, hot-rods or whatever you want to call them, but merely jacking a car sky-high and sticking leaf springs and a straight axle under the front end does not make a car into a 'g***er'. Mart3406 =========================
Thank you...I really do have to agree with this...Also, perchance are any of these photoshop g***ers? People love to post pics....
This is a 70's Street Freak, not a G***er style car at all. The original G***er stance was for weight transfer. This stance was done merely for "shock and awe".
I've seen this car and talked to it's owner at Mooneyes open house last Summer. A VERY nicely built car, and it runs really good too
So only ORGINAL purpose built race cars can have the name G***ER? In 1964, the basic rules for G***ers were unchanged from 1963. As many of the rules were changed in 1962 and the G***ers were now much less dual-purpose street & strip machines than had been required prior to 1962. The bodies were required to be a coupe or sedan body originally produced by an American automobile manufacturer, with the following exception There are at present a few foreign coupe and sedan bodied cars that, in general characteristics, better meet the requirements of Gas Coupes/Sedans cl*** better than sports car cl***. Provided these car bodies and cars do meet all other cl*** requirements wheelbase, etc. these cars are cl***ed according to cubic-inch displacement to weight under this section. As in 62 and 63, the Anglia was restricted to small-block, unblown engines only. Moderate customizing was permitted, but the total height of the body still couldnt be reduced more than 4. Fibergl*** fenders, hoods, doors, and trunk lids were allowed, but their use required the addition of a roll bar which was otherwise only required in the supercharged cl***es, A/G, and all convertibles or customized cl***es. Yes, convertibles were permitted in the G***er cl***es, but had to run with the top up. The rules also required the seats to be in the stock location, but they were permitted to be relocated no more that 4 rearward to allow additional legroom. The other interior rules were subject to a lot of interpretation. The rules for Upholstery read as follows: Interiors may not be gutted. Must run full upholstery, equivalent to factory specifications. Floor mats optional. Bucket seats may replace stock seats (two required), only if they are fully upholstered. Rear seats are optional. Factory type upholstery and/or paneling must be used in lieu of the above. The cl*** breakdowns were according to the following tables. Supercharged cl***es: <table cl***="MsoNormalTable" style="border: medium none ; width: 6in; border-collapse: collapse;" id="table2" border="1" cellpadding="0" cellspacing="0" width="576"><tbody><tr> <td style="border: 1pt solid windowtext; padding: 0in 5.4pt; width: 59.4pt;" valign="top" width="79"> A/GS </td> <td style="border-style: solid solid solid none; border-color: windowtext windowtext windowtext -moz-use-text-color; border-width: 1pt 1pt 1pt medium; padding: 0in 5.4pt; width: 383.4pt;" valign="top" width="511"> 6.00 to 8.99 lbs. per cubic inch </td> </tr> <tr> <td style="border-style: none solid solid; border-color: -moz-use-text-color windowtext windowtext; border-width: medium 1pt 1pt; padding: 0in 5.4pt; width: 59.4pt;" valign="top" width="79"> B/GS </td> <td style="border-style: none solid solid none; border-color: -moz-use-text-color windowtext windowtext -moz-use-text-color; border-width: medium 1pt 1pt medium; padding: 0in 5.4pt; width: 383.4pt;" valign="top" width="511"> 9.00 to 12.59 lbs. per cubic inch </td> </tr> <tr> <td style="border-style: none solid solid; border-color: -moz-use-text-color windowtext windowtext; border-width: medium 1pt 1pt; padding: 0in 5.4pt; width: 59.4pt;" valign="top" width="79"> C/GS </td> <td style="border-style: none solid solid none; border-color: -moz-use-text-color windowtext windowtext -moz-use-text-color; border-width: medium 1pt 1pt medium; padding: 0in 5.4pt; width: 383.4pt;" valign="top" width="511"> 12.60 or more lbs. per cubic inch </td></tr></tbody></table> My car would have been a B/GS, so please tell me why its not a g***er? Because I chose to put bigger back tires on it?
If I remember correctly this car was originally a race car a G***ER so here is one in the thread that is real.
The Jalopy Journal
