Who's Bagged there 39-40 Mercury's

Just looking for some advice from those that have done it even some pics would be nice. What did you use 4 link, traingulated 4 link, 3 link , I'm not looking to lay frame but would like to be able to adjust ride height for the speedhumps around town. maybe have that nice California rake. i already have a mustang 2 upfront with leafs in the rear. Thanks for your time Doug

 

They did one on that silly show Chop Cut Rebuild on the Speed channel; maybe you can find it on youtube or google it; I think they did a 4 link with bags on a sweet 39 or 40 merc. Worth a try. Good luck!

 

what Mustang 2 cross member did you use? I do not see where Heidts or Ch***is Eng makes one for it,

 

Hey I am in the progress of making a rear 2 link bag kit for the 39/41 Merc. It will require very little floor pan mod's just like my 49/51 merc kits do. Here are some pics if of one. My 2 link setup have alot of real world side to side twist check out the pics. If interesred in this kit let me know.

Rick Erickson of Extreme Kustoms

 

From a few years ago on a 49-50. Camaro clip and GM G-body rear axle.

http://s206.photobucket.com/albums/bb93/ELpolacko/1949 Mercury frame/

 

Hey Goug thanks for your interest in my new kit. To try to answer your question you PM me. Here are some close up pic's of the pan hard bar and how it is attached. Hope these pic's help.

Rick Erickson of Extreme Kustoms

 

Thanks for the pics guys this is the kind of advice i was looking for. and the mustang 2 was on it when i got it but it looks like a regular weld in one. the front 4 feet was replaced with 2x3 box when the mustang 2 was installed