Dan Pate rouye56wingnut puts on a good meet. Dennison is south of Saint Paul. Hope to see some HAMB people there!!
Jeff,I was just going to post it and here you did it for me.Thanks.I have those press forms all ready for your 32 shell so we can get going on it right away.Jessie is Jonsing to help getting going on the sedan delivery.Never get any time to work on it so if I get started on thurs. before everybody shows up I should have most of the back welded up.Anyone that is comming please PM me and let me know so we have plenty of food.Roger is comming up and I hope Uncle Johnie and Grant show as well.Dan, P.S. The dates are Oct. 22-24
I dont want to jinx it,but the last 3 have been some of the nicest wheather I can remember.Anyway I have plenty of room if the Wheather turns on us.
I thought since the meet is this month we better get it out there. Hope Rodger brings his cooking utensels
It wouldnt be the same without you,I dont think youve missed one since you first started comming.Look forward to seeing you there,but I will probably run into you at the Rodsters swap meet first.
I thought I'd give this a bump and add a map. This is a good time guy's. I've picked up some good ideas at these meets!! Jeff
I ran into several people at the Roadsters swap meet that are coming.***us ,Jen,Stacie,green53ford,Matt Bye,Barry Larson and several others.We are going to louver Jens hood,work on Jeffs Vicki quarter,and Stacie just cant wait to beat on some metal.Should be another fun one.Dan
Sounds like fun!! I might not have to bring a project, more room for tools QUOTE=rouye56wingnut;5761670]I ran into several people at the Roadsters swap meet that are coming.***us ,Jen,Stacie,green53ford,Matt Bye,Barry Larson and several others.We are going to louver Jens hood,work on Jeffs Vicki quarter,and Stacie just cant wait to beat on some metal.Should be another fun one.Dan[/QUOTE]
It would help Dan out if everyone planning on attending would post. I'm coming up with 1 guy. Marty isn't a HAMB member, but he runs a restoration shop called Straightlines. I'm bringing my coupster, and hoping to get a decklid built for it. I'll be bringing my e-wheel set up with a tipping wheel, my bead roller, pullmax dies, and a variety of ***orted tools and stuff. I'll bring a '36 ford rear fender buck to keep Marty going too. Jeff Dyce
Trucks loaded and I'm leaving this morning. Couldn't sleep last night thinking about the decklid and other stuff I plan on trying to get done!! I'll post pictures of the Meet as it happens.
210Sedan, a metalmeet is a group of people who get together to help each other with their metalworking projects. you can find more out here www.metalmeet.com You don't need to be an expert or have lots of tools, just and open mind and a good heart! tt
It is always a pleasure to have people down with the enthusiasm the likes of you and Stacie.You have earned the right to come down any time with a project we can all work on as I know it would involve you doing and learning rather than just standing around watching.We will be hosting another event in the spring and will be looking forward to seeing you with a new project to show and work on.
Thanks, Dan! It was so inspiring to see all the people with amazing projects. I'm so excited to stop down when I'm ready to go with a couple things. Can't wait to see my rooster friend and the pea****s again too!
I had a blast!! I met some new freinds, made some peices for my decklid, and learned a few new tricks. I might start buying lotto tickits now after running the Ekold!! That machine is like cast iron ******!! I didn't get much done though. By the end of the weekend Dan's name was "Hey Dan" and mine was "Hey Jeff". It's a cool thing to see so many people together willing to help each other out. I just slept 12 hours... Jeff
My pictures are all to dark for you anyway I was to buisy to take pictures. I saw alot of cameras going so I didn't worry about it. If Dan doesn't post picks I'll get some of his and post them.
your supposed to use a flash if the lights aren't on..... Heck I was beginning to think Dan was an Amish metalshaper Joel asked when the next meet was and I told him this weekend.... he changed his mind. He does want to go to Nebraska, Pat and Chris were working with him on on W/O p/u. he heard the stories of all this vintage tin out there..... so maybe if we do something out that way, heck we are getting close to you we could pay you a visit!
Terry we were talking about having a meet at my shop. I plan on having one but have no idea on a date. Maybe late spring after Dan's. It would be nice to attend a meet and not have to haul Of co**** I know it's more work in the end to host.... I hope you do visit if you get close.
Lots of talent in that noodle to share with others.It would be nice to share some demos for others to see.We will talk befor then as we both know I will probably come across more steel ****** to tease you with.Dan
The Jalopy Journal
