tranny pan bolt torque

What is the proper torque for the filter screws and pan bolts on a turbo 350?

 

pan to case bolts 13 ft lbs
the filter not sure always just snugged them up with a 1/4 drive ratchet
hope that helps

 

13 ft/lbs sounds a little steep for me...GM spec is 94 in/lbs for cork gasket and 97 in/lb for paper.

 

10-12 ft lbs Is what I learned

 

Had a brain fart..if the cork gasket has those metal spacers in it, then 10 to 12 would be about right.

 

i never use cork gaskets i guess i should have elaborated
13 was right out my gm unit repair manual

 

whisper,promise plus half a turn

 

WOW that's 156 inch lbs!