Motor and Cross Member mounts for Y-Block in 32' Rails.

Here are some pics of the motor and bell housing mounts I made for my 292 Y-Block in 32’ rails. The truck Y-Block bell housing was modified by John Mummert to accept a T-5. This will be topped off with a 28’ Ford Sport Coupe Body.

><O></O>
<O></O>
<O>The cross member was from a 55' Ford truck and cut to fit in the rails.</O>
<O</O

 

Motor squared up and level. The motor mounts are from an early 50's Ford car.

 

Templates being converted to steel and cut out.

 

Love them Speed holes!

 

Everything mocked up and tacked in place.

 

Welded and donor block in.

Support Your Local Car Clubs

 

hi
wondering what did john mummert modified on the bell housing ?

 

There was 2 bungs that he had to relocate so that the T-5 would bolt to it. Other than that it goes right in. Just need a different clutch disk for the T-5 spline but still use stock Y-block pressure plate.

 

Whoops just looked back at pictures and relized these were taking before I had sent the bellhousing off. It was still unmodified at this time.

 

looks good.

 

Thanks!