Free step notch for 47-54 chevy truck

We at Jimenez Bros Customs are giving away a free step notch kit for chevy truck 1947-54 , Please submit photos we will pick truck as soon as we get 25 photos to choose from.

recipient responsible for shipping and handling

thank you
JIMENEZ BROS CUSTOMS

 

wow . this was a few pages back allready. i will bump it for those that need it. I will put mine up later

 

My ol' 54' lowered the "Poor Man Way" with leaf spring removal.

 

PICK ME, PICK ME

 

I'm throwin in my hat. Here's when it came home and about where I'm at so far...

 

Great giveaway guys! My new project..getting ready to be torn down!

 

Boy Howdy you are a mind reader.
I just moved my frame around in front of my garage last weekend to get started installing the front cross member and was pondering what to do for the step notch in the back. I am running leaf springs in the back an don't need a huge notch so that would be perfect.



As it sits today. The wheels are getting changed for steelies and white walls.


As low as I can get the back end now as there is one inch of clearance over the axle.

 

51 , chopped, MII front, leaf rear...so far... converted window to 1 pc. ,53 door handles with bearclaws, ton's of smoothing...

 

I have 2, here is the one in the shop right now,

 

Help a brother get down from the nose bleed seats. 1 tons sit 18 1/2" from the rockers to the ground. Scott Danforth kit going in up front and an RBs for the rear but it just won't be low enough. Even with a BBC/TH440!

 

My 48, just waiting to have some cool applied.

 

Here is my 50 Gmc suburban it need to be low and slow.

 

1948 Canadian Chevy.
I'm just about to buy a bed and this would be perfect timing!

 

IF ITS FREE! ITS FOR ME! I need all and any help I can get!. Starting on the chassis now.This would be a very welcome part. The chassis that came with the truck was JUNK!(see photos) I found a replacement and a S10 rear. I also have a dropped axle for the front and a mounting kit for the rear(new springs & mounts, shock mounts,ect...) , but need to get it down lower to work with the front drop. I am further along with the chassis than the pictures show and I had planned to do this anyway, but this would save me some money for other things and move me ahead greatly!. Thanks Mel

 

Hi, I hope to be able to help with my threads. Good work

http://www.jalopyjournal.com/forum/showthread.php?t=535744&highlight=how+to+lower+my+53+chevy+truck

http://www.jalopyjournal.com/forum/search.php?searchid=13143111

 

Count me in! I am just about ready to start hacking on my truck and that notch would look nice on it.

 

here is mine. the bed is off and being rebuilt. I will hold off on the bed till this is over.

 

Here's mine. Putting a 54 car ifs on it with dropped uprights., s10 t5, s10 rear. Then a set of genie caps and rings. Putting her on the ground.

 

Adam,

Watch the S10 rear end if you don't intend to tub. The 4x2 is too narrow and the 4x4 is not right either depending on wheel offset. If you have the ZR2 you should be OK.

 

I had heard that the 4X4 was a good option. I will be ordering the wheels so I will have to get the offset right. Whats wrong with the 4x4 rear?

 

Great idea Cain. is your brother pulling his own weight? hahah the notch looks cool.


Dante

 

Dante....man, you know everyone bro!! hah

 

Heres a larger shot

 

with this kit, what modifications are required to the bed floor?

 

.....'54's probably ok but the '49 could certainly benefit.

 

I could use it on my '50 or...





...or my 48

 

Here's mind it's a 49 now 5 window and heres what the frame looks like right now.

 

I'm in!

my 52 has the stock frame under it

 

Mine's on an S-10 frame and I have plenty of room to put the running boards on the ground if I want to. No need for the step notch but thank you for providing it tor the lucky winner.