I am looking for Pics of 6 carbs on top of a Hemi for a model I am building. Any help would be appreciated.
http://www.jalopyjournal.com/forum/...achmentid=1275481&stc=1&d=1300831734300831734 Hi there I'm not sure if your receiving my pics but you might have them by multiple , regards steve
This is what I am working on. I am trying to figure out on what side of the carb the fuel lines come out of and how they will go into the fire wall. Will it be one inlet with 6 fuel lines going into it or 2 with 3 going into each.
These are 94s on this Edelbrock log manifold. Sorry, don't have the fuel lines or linkage installed yet. Just mocked up.
as you look at the car the fuel line intake to the carb is on the right . you could plumb the fuel line for the left bank of carbs back to the centre & run them back to a six outlet fuel block on the fire wall ?
That's what I thought but I just wanted to make sure before I start running them. THose little resin carbs are expensive for model parts, so I wanted to make it right the first time. Thanks Guys.