hello H.A.M.B from aus

hello everyone

names jeff i am 24 and i reside in Sydney Australia

2 months ago i started my first project a 38 Chevy 1 ton truck.

its slowly taking shape with a steep learning curve

i am aiming for a 50's style fender less truck.

currently i am looking for a 235/292 inline 6 sadly they are hard to find in aus but i dot plan on giving up.

not sure if its ok to post a picture or a link to them but i will please let me know or remove if i am not supposed to.







thank you

jeff

 

wlecome jeff looks like a solid truck look up www.newenglandrods.com under the **** we've done in random **** theres some photos of my mates thats along the lines your talking .keep the nose to the ground for the six i dont think they are that rare

 

thanks hammeredrods

yer ive been calling around and keeping a eye out for the 6's have a few months before ill need it and at worst ill ship one over.

also looking for a 3.55 gear set from a '50-'54 powerglide equipped car as they are a bolt in with the 37 torque tube im running.

 

damn i got a 52 but was manual and is 3 hrs away so i cant just slip out and check for ya

 

Please reconsider the "50's style fenderless truck" look.

Very very few have managed to do it well.

 

haha all good hammer

peddro it will be fendered for rego but then depending on how it looks they will be replaced with cycle guards. but to far away to be 100% on how it will come out

do you have any photos of a well done one?

thanks guys

 

You have a nice project there, good luck with that, keep us posted and Welcome to the HAMB from California.

 

Welcome

 

Welcome from Indy....we love pics.