What do I need between my '39 tranny and F1 crossmember?

I have a '39 3 speed ****** bolting to a F1 crossmember transmission mount.

What should I use between bolting the ****** on to the mount?

I would think that there would be a rubber biscuit that I could use. The gap is only about 3/4".

What are you guys using?

Thanks!

1930 Ford Coupe Body
1932 Frame
F1 transmission crossmember and mount
1939 Ford 3 speed ******

 

Perfect!

I just ordered another Transmission Mount from Mac's. The original one was in bad shape.

We'll just need to modify the new one a little bit where it bolts together. There is that 3/4" gap and the bolt holes dont line up too well.

So the ****** bolts right on to the mount and the rubber under the mount is the cushion..got it.

Thanks for your help!

 

Hey Skidmarks, I bought this crossmember from you.

Think that might be hard to find.....

 

I've got a couple of the 41-48 rear mounts. Shoot me a PM if you are interested in one. -JH

 

Hello Junk Hunter,

Ok help me out here.

If I take off the section of the '39 ****** that has the ears that bolt to the transmission mount and use yours. I can then bolt right to the mount?

That would be good, then I wouldnt have to modify the mount.

The ****** is over at my friends shop, so, I dont have it in front of me to take a look at it.

 

Sounds easy enough. Thanks for the help.

You probably remember me. First time builder.....

 

^^^what he said..

I can get you pics of mine tonight if you want. They are still on the ******s..

 

Yes, Please send a pic. I need to make sure I'm buying the right thing. I have a history of buying two of everything. I told my wife I was building an ark.

My regular email address is:

scott-irwin@sbcglobal.net

Thanks!!!