Register now to get rid of these ads!

Stupid ash trays

Discussion in 'The Hokey Ass Message Board' started by 60olds98, May 9, 2011.

  1. Hey, I have a '60 Olds and can't figure out how to get the ash trays out of the dash. It's probably simple but I can't see it. Any help out there?
     
  2. handyandy289
    Joined: Sep 19, 2010
    Posts: 354

    handyandy289
    Member
    from Georgia

    Try pushing down on the but tab. and pull out at the same time. Works for most of the older cars
     
  3. They swing down to open, rather than pulling straight out so pushing the tab won't do it. Anybody with a '59 or '60 GM would probably have the same style ash trays. Any ideas would be appreciated.
     
    Last edited: May 11, 2011
  4. Spring tab has to be pushed up if I remember right.
     
  5. Mr48chev
    Joined: Dec 28, 2007
    Posts: 35,321

    Mr48chev
    ALLIANCE MEMBER

    Couldn't have said it better. the butt tab is usually the latch for the Ashtrays. Push down on it with your thumb as you swing the ashtray back towards you.
     
  6. Ralphies54
    Joined: Dec 18, 2009
    Posts: 785

    Ralphies54
    Member

    Try opening the ash tray fully ,then pull up towards you.
     
  7. Strange Agent
    Joined: Sep 29, 2008
    Posts: 2,879

    Strange Agent
    Member

    This.
     
  8. A chevrolet from that era you open the ashtray ( it swings down) then puch the but tab (it should be round) and swing the ashtray farther down then pull it out. The whole colored part comes out.
     
  9. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,136

    Hdonlybob
    Member

    PLUS ONE.....my '63 Biscayne is like that....removed it recently to paint the dash....
     
  10. You may need the ash tray removal tool P/N SA-14099 and if you can't find it by part number here is a picture [​IMG]
     
  11. Hot Rod Chris
    Joined: Mar 31, 2011
    Posts: 464

    Hot Rod Chris
    Member


    Lol
    :D
     
  12. 8-9-duck
    Joined: Mar 25, 2008
    Posts: 63

    8-9-duck
    Member

    some of them,just the little cup came out.
     
  13. phukinartie
    Joined: Oct 8, 2008
    Posts: 965

    phukinartie
    Member

  14. temper_mental
    Joined: Oct 22, 2006
    Posts: 2,717

    temper_mental
    Member
    from Texas

    Take a air hose and just blow the ashes out:D
     
  15. Blades
    Joined: May 25, 2006
    Posts: 1,188

    Blades
    Member
    from Chicago

    Try squeezing the ash tray together, maybe it's tweeked from years of in and out. My 61 had the same prob... I squeezed it hard and it came out.
     
  16. 5window
    Joined: Jan 29, 2005
    Posts: 9,814

    5window
    Member

    Oh, I just don't like the sound of THAT! :)
     
  17. I didn't squeeze it, but I yanked on it and it came out. Thanks for all the suggestions-even the jokes! I almost used that hammer......
     
  18. oldcarfart
    Joined: Apr 12, 2005
    Posts: 1,436

    oldcarfart
    Member

    you betcha!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.