looking for Arizona frame builder

Looking for a good frame builder in the Phoenix area. Planning on perching the front and big Z the rear. Any solid recommendations are much appreciated.

Have rails and all other goodies ready to go!

thanks

 

welcome to the hamb....a fair warning from another Phoenician, its reccomended you intro yourself, a little about what your building.

I say this to stop the beating that probably will procede from the intro-police.

 

I could schedule you in,


Industrial Chassis Inc
3536 W. Osborn
Phoenix AZ 85019

Or try

Premier Frame and Body
3029 W. Clarendon
Phoenix AZ 85017

602 248 0812

 

And...Yes that is the answer to your question

 

Go to SO Cal and get screwed
I have customized frames and haved learned alot from reading.
If you can weld, give it a shot

 

Ditto

 

Another ditto for ELpolacko

 

I figured I could get some local recommendations here, I will call the shops above and see if they are for real. If I had the time to learn how to weld I would not have posted. Just need help getting my frame the way I want it. If there is someone in the Gilbert area that knows their stuff I am a serious builder. All the other stuff I can handle.

Building a 29 roadster pickup with 32 drop axle, 34 rear end, Chevy 2 4 cyl (iron duke) 39 tranny, 16 spokes, laid out. Have everything just want to get the frame done.

Any help would be nice

 

ELPolacko is good folk. He does great work as well and has a wealth of knowledge/experience with chassis and frames.

 

http://www.darrylsmithracecars.com/

 

As said before, ElPolacko at Industrial Chasis.

Also, Frank Borowitz at Premier Body and Frame. They specialize in quality, reasonably priced Model T, Model A and '32 Ford hot rod frames. They're not far from ElPolacko's place.

Premier Body and Frame
3029 W Clarendon
Phoenix AZ 85017
602-248-0812

*This has been a message from the Department of Redundancy Department*
Doh!

 

Get out your phone book , call every hotrod shop and go visit every single one DO NOT CALL ELPOLAKO UNTIL YOU DO THE ABOVE STEP then take your frame with you to industrial chassis AKA steve AKA elpolako . Why do all this leg work ?
You will get 50 opinons and 30 recomendations , and since your new you may just get the wrong shop . .
OR save all the hassle of all that calling and driving and just let the BEST shop have it FIRST and give it to INDUSTRIAL CHASSIS .
stop looking for close to your house and look for the best

 

If you do not follow this info right here you area fool.

 

What he said, Elpolacko is tops in my book. He is not a houshold name but should be.

 

I stopped by el Polacko's shop when in town last summer...check him out, he knows the business.