Register now to get rid of these ads!

Hello from a new SoCal metal shaper!

Discussion in 'New to the H.A.M.B.? Introduce yourself here!' started by SpecialtyCars, Jun 7, 2011.

  1. SpecialtyCars
    Joined: Jun 23, 2010
    Posts: 19

    SpecialtyCars
    Member

    Hello all!

    My name is John, and I thought I'd drop in to say hello!

    I took over Specialty Cars about a year and a half ago, and am in the process of getting the shop back up and running! I specialize in custom metal shaping in both steel and aluminum, as well as detail fabrication and precision TIG welding of everything from Mild Steel to Titanium and Inconel.
    I am also a dealer for Winter's rear ends, Coker Tire, Dayton Wire Wheels, Fragola hose and ends, FK rod ends, Genuine Stromberg Carburetors, Motul oils, and many others.
    I'm in the process of setting up an Alliance Vendor deal...so look for some killer discounts and H.A.M.B.-only deals in the near future!

    While most of my work to date has been bodywork for El Mirage racers and cage updates, I'm about a month into a from-scratch car build that should turn a few heads! I'll throw up a few pics as I get close to the reveal date!

    I look forward to contributing as much as I can to the community, and hopefully learning a few things along the way!

    Best,

    John K.
     
  2. Dave Rondou
    Joined: May 26, 2008
    Posts: 669

    Dave Rondou
    Member

    Welcome to the site John. Good luck with the shop.
     
  3. Metaltwister
    Joined: Jul 10, 2007
    Posts: 891

    Metaltwister
    Member Emeritus

    Welcome to the Hamb from another So Cal Shaper! You will find the Hamb a great resource for a lot of things. Enjoy and good luck with the venture.
     
  4. Hello and welcome to the H.A.M.B. from the midwest!
     
  5. jhnarial
    Joined: Mar 18, 2007
    Posts: 410

    jhnarial
    Member
    from MISSOURI

    Lets see some of your sheet-metal work
     
  6. JBOLTON
    Joined: May 24, 2006
    Posts: 243

    JBOLTON
    Member

    welcome from SLO, ca.
     
  7. pumpman
    Joined: Dec 6, 2010
    Posts: 2,674

    pumpman
    Member

    Welcome from Union Pier, MI.
     
  8. farmer12
    Joined: Aug 28, 2006
    Posts: 7,717

    farmer12
    Member

    Welcome from the Netherlands John!
     
  9. SpecialtyCars
    Joined: Jun 23, 2010
    Posts: 19

    SpecialtyCars
    Member

    Hey all!

    Thanks for the kind greetings! Below are a few pics of work I've been doing.

    - First is a pic of a '41 Willys rear fender I'm making from scratch, from a buck I constructed based on two original fenders...a little more work left, but the first third is coming along.

    IMG_1024.jpg

    Second and third are pics of the front hoods and interior tin work done for a '31 5-window comp. coup I did for a fellow Rod Rider

    Eric's coup 003.jpg

    Eric's coup 028.jpg
    - Fourth pic is of an aluminum cafe seat I made for a CB160 AHRMA racer I'm building. The hump is comprised of a left and a right half, welded to the seat base.

    IMG_0328.jpg


    More to come!
     
  10. SpecialtyCars
    Joined: Jun 23, 2010
    Posts: 19

    SpecialtyCars
    Member

    Below are a couple more of the comp. coup mentioned above:
     

    Attached Files:

  11. JBOLTON
    Joined: May 24, 2006
    Posts: 243

    JBOLTON
    Member

  12. SpecialtyCars
    Joined: Jun 23, 2010
    Posts: 19

    SpecialtyCars
    Member

  13. tooslow54
    Joined: May 6, 2005
    Posts: 929

    tooslow54
    Member

    Nice work John! Welcome aboard.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.