yblock oil pump drive

Howdy. Having trouble finding the right oil pump drive shaft for my yblock. Neither my oil pump, nor my distributor have hexagonal drives, but the hex drive shafts are all I can find.
My distributor and oil pump have tabs that should fit into a notched shaft, or maybe an adapter. Anyone have any ideas?

 

it is a slotted shaft not hex or adapter
might try asking over on the www.y-blocksforever.com site
or try
http://www.ford-y-block.com/

 

sounds like a lincoln y block

 

You have the '54-early '55 tang/slot style of drive... after that production changed to the hex style.

So far as I am aware, the early style is not available new.

Check with Mummert for a used one as Lost Hope listed in his second link, or the board listed in his first link....someone will have one, they are not uncommon.

 

cool, thanks alot guys. I think my stuff might be marine stuff (the 4bbl intake I took off had no water neck.) Does the later marine stuff use the tang style drive?

 

get a hold of "Flat Top Bob" at owens salvage on here, just went through the same deal on a 54 239, great guy and had what i needed! 800-798-3581