A different PS problem, any ideas

A see there is another thread about P/S problems but mines different. 53 Pontiac with a Camaro subframe. Old box was worn out so I replaced it with a new one from Speedway. Turns fine to the left but super hard to turn to the right, you would think it was a manuel box with big bias plies. Any ideas of anything I can try besides pulling the box and sending it back, I'm trying to get this build done and to my buddy (the owner) for his 65 birthday a week from Saturday. Running out of time.

 

Yup, the box is no good. Sounds like the ball/worm ***embly was put together wrong.

 

X2 on bad box

 

tell speedway to overnight a new box on their dime.

 

X3 it's a pain in the *** but you're going to have to pull it and send it back.

 

Camaro firebird and nova's are all the same ,To tell what year box it is they made two different subframes Box in front of crossmember and behind ,Im sure if your in a pinch You can find an original ........

 

Shuttle valve inside box is faulty or installed wrong. Sorry, ya gotta send the box in.

 

Air bubbles need bleeding right in the box???