Brake/Clutch/Slavecyl. Please help identify

I have these cylinders in my 40 coupe, and need to rebuild them.
They are used as clutch cylinders on a Chevy 327 67. and the slavecyl looks original.

Anyone who can help me identify them?

Thanks.

Tommy

 

Please post the casting numbers. I have access to old catalogs with cross reference and illustrations.
Should be able ID, and provide kit info
Dave

 

the slave cylinder looks like what was used on a `61 chevy C-10 pickup

 

the master cylinder looks like `57-`60 Ford f-100 pickup

 

Slavecyl nr: 3461103 D2 1 1/16 DIA. Moraine products Dayton O USA.

Master nr: AB- 2155-A D3 1 DIA. On other side303613 136 BB

Thanks.

Tommy.

 

The hydraulic clutch setup like that was used on Chevy trucks all thru the 60s, in the later years it was only used on the bigger trucks,and there were 3 different ones. Looks like you have the one used in the 60-62 half tons with V8.

The master looks like it could be that ford unit, here's a picture of a new one at rock auto

 

Casting # and pic ID catalog = Results !
Master cyl is EIS brand # E 23222 , kit # M109 , fits 51 up ford car ( sorry Squirrel, the 40 mcl is triangle mount )
Slave cyl is EIS brand # EW 34447 , kit # c689 , fits 62 up gm truck.
Dave

 

Thanks for all help! Very helpful!!

Tommy.

 

This what I meant by "that ford unit"....not the old triangle mount

 

the MC is 52-56 Ford F series 1" Bore have those in my car.

 

I'd say that too