Register now to get rid of these ads!

55 Pontiac Turn Signal Switch

Discussion in 'The Hokey Ass Message Board' started by Irish1955, Oct 26, 2011.

  1. Irish1955
    Joined: Sep 14, 2011
    Posts: 56

    Irish1955
    Member

    Fellas, I am having problems with the turn signal/flasher setup on the 55. I have confirmed both taillights and brake lights are working (after buying and installing a new stoplight switch). I am not getting anything from the turn signal switch. I have a few questions about this:

    1. is the 55 Chevy switch the same as is on my poncho?

    2. anyone have a good source for these switches?

    I would really rather not put an aftermarket turn signal setup in the car, so I am determined to get it working properly.

    As always, thx for your inputs and help!!
     
  2. squirrel
    Joined: Sep 23, 2004
    Posts: 60,039

    squirrel
    Member

    Do the brake lights work when the turn signals are turned off?

    Do the front turn signals work?
     
  3. Irish1955
    Joined: Sep 14, 2011
    Posts: 56

    Irish1955
    Member

    No front turn signals and yes, all running lights and brake lights work with turn signal switch in the nuetral position. I haven't noticed if any of the lights dim when the turn signal switch is engaged. I have had my fair share of issues related to grounding on old chevy trucks, but as far as I can tell it seems to be the switch. If the fuse was blown I would have nothing to the rear lights right?
     
  4. squirrel
    Joined: Sep 23, 2004
    Posts: 60,039

    squirrel
    Member

    There are two different power sources going to the turn signal switch. One is the turn signal flasher can, which gets power when the key is on. The other is the brake light switch, which gets power all the time.

    If the flasher can is bad, or if there is no power to it, it would not blink. The brake lights would still work.
     
  5. Irish1955
    Joined: Sep 14, 2011
    Posts: 56

    Irish1955
    Member

    Oh I see. Well, I have changed the flasher can and I have also changed the brake light switch and confirmed power from the brake light switch to the flasher, so I need to confirm power from the key switch to the other leg of the flasher unit?
     
  6. squirrel
    Joined: Sep 23, 2004
    Posts: 60,039

    squirrel
    Member

    The brake lights switch should not be connected to the flasher, it should be connected to the turn signal switch. The flasher can should be connected to a different terminal on the turn signal switch.

    This is how they are usually wired, the block in the center is the turn signal switch, and the 4 corners of the car are wired to the ends of the switch.
     

    Attached Files:

  7. Irish1955
    Joined: Sep 14, 2011
    Posts: 56

    Irish1955
    Member

    Awesome. Thank you very much. I have to go home and check again, exactly what I have.
     
  8. 55chieftain
    Joined: May 29, 2007
    Posts: 2,197

    55chieftain
    Member

    The power for the flashers comes directly from the fuse box. If you don't have the wiring diaghrams here a link to help, it's for a 57 but the wiring is the same for what you need. There's also an online 55 Pontiac shop manual at pontiacsafari.com

    http://starchief57.tripod.com/wiring.htm
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.