I have a 57 392 Hemi. I have a trans-dapt NC25 bell housing adapter. Where can I find some info on this adapter? I have done a google, no luck. If the adapter bolts to the engine, how does the starter bolt up? A starter mounting plate between the 2 parts? ANY info appreciated.
It's made to bolt to the stock aluminum starter mounting plate that the engine came with from the factory.
Did anything come of this thread? I have one of these that I want to use. I find myself in the same predicament, little to no info online.
I didn't use the trans-dapt. I ended up with a Wilcap. I did find out that to use the trans-dapt, you will need a stock starter mounting plate. They are listed on ebay every so often. I've seen them for sale in the cl***ifieds here too. Good luck.
Most, if not all, of the old-time manual aftermarket bells used the fat 57-58 plate which retains the 57-58 12volt starter and also needs the 172 tooth flywheel. You should not have to pay more than $50 to have it on your door step. .
The Jalopy Journal
