Customs Gambino kustoms fatman fab. Happy f%#king thanxsgiving swag givaway for tail draggers

What's with all the swearing?

 

Count me in. Can't wait to get going on my 49.


Satan's Chauffeurs

 

1947 caddy with,49 rear panels and 1960 390 my daily roller to and from work!

 

love the notched wheel chock!!!

sorry Al it just caught my eye....

 

hahaha That's a 50s E-Brake!!

 

Bought this one from a fellow-HAMBer and shipped it to Belgium... blocks and cut coils for now but planning on puttin in a 4-link and baggin the stock front this winter so this would come in handy!! Much respect for doing this Alex!

 

Put me down on the list Alex, I want them for my new 40 Plymouth coupe..The goal is to make it to Billetproof Antioch 2012 with it lay'd out.

 

hope this worked

 

Alex, Im in with a 50 Mercury Im going to save from the crusher!!! Some jerkwad really messed up the top on this one. Im going to use the moredoor and a 2 door top I have to save this little guy and a notch/upright setup will help get it on its way. Thanks again, ETHER

 

I'm currently working on a 54 Chevy 2 door right now and next in line is my 49 Chevy sport coupe.

Thanks for the opportunity Alex!

 

You guys are the bomb!!! Heres my entry, 51 Mercury. Bought it from my brother, ETHER here on the HAMB. He did all the work so far. Big plans to make this a driver!!! Thanks, NEWBOMB

 

Well hell lemme throw my hat in this thanksgiving ring!
Mine is a 49 hudson with a cadillac 472 plan on 4 linking the rear bagged all the way around and the mercury/shoebox front end is indentical.....

 

I am at that stage now and winter is fast approching and I could definetly use the notch kit as my tail aint draggin yet. My 49 should be completed by spring. Oh and by the way happy fucking thanksgiving boys.
Good luck to everyone!

 

Wow, that´s really generous!
I´m in need of both uprights and a notch-kit and I will be happy to pay the shipping to Europe!

 

yer in bolth
thanxs
and good luck

 

Alex, I wanna make sure you didnt miss me on post #29!! I snuck it in while you were posting other responses!!....Just checkin, thanks

 

thank you .

 

alex i just canceled thanksgiving so everyone can watch at 12 am . ..

 

yer down for 2 and a WTA good luck

your in for ea. and a WTA

 

some great cars that need this for thanksgiving , my 1951 plymouth belevedere has been sitting since 1977 doubt it will ever be finished due to health and finances prevent it and that i cant drive .

good luck to everyone

Jen

 

Have always wanted a 50's chevy with it's tail draggin! Would love to be in the raffle with my 52 chevy which I am in the process of building!! Thanks for all for putting this on!

 

Cheerio,

I'm working on my '51 Chevy. Frenched, made the hood one piece, extended the back, removed stock taillights, future taillights in my Kaiser overrider, 54 pontiac grille, cleaned and smooth. Got some blocks in the back but I want it lower. Not extreme cause I like the mid 50s customs jobs the most.
Thanks for reading
Chris
Speed Seekers
http://speedseekers.blogspot.com/

 

Here's mine Alex...
51 Chebby Styleline Sedan, Cali style taildraggin..... could use those parts!!!

Spoons

 

I think I qualify. I got a pair of coil springs from the Courtney H auction, now i need uprights and the rear to get it down..

 

Hey Alex,once again,thanks for your generosity.My 50 Coronet is still under construction.Sorry,I don't need the uprights,but I sure need the notch kit.The rear is as low as it is right now because I took out a couple spring leaves and now they are arched the wrong way.So-----it's gonna be bagged.

Fuzz

 

My first
Project plans are to
Chop it
Bag it
Drag it
Hope u pick
Me thanks


Drag it!!!!!!!!

 

1952 Chevy, still have to finish the body. Needs to be lower in the rear with a notch. The cut spring in the front didn't get it there either.

 

Alex is back at it again! Please enter my 1948 Pontiac for both. Plans are to make a mild custom with some extra power courtesy of a 425 nailhead dressed in vintage speed parts. Drop spindles up front, 4 link out back and bags all around. A deep smooth color to finish it off.





It is about time for chassis work to begin so the timing would work out great ;-)

 

thers a few bowties!
not many kustom caddys!
uprights&taildragger and this kustom would sit nice!!

 

in for bolth

yer down for ea.

good story good luck your in for bolth

in for bolth