Register now to get rid of these ads!

64 belair 250 inline six, Straight pipe or glasspack?

Discussion in 'The Hokey Ass Message Board' started by 64Belair, Jun 2, 2005.

  1. 64Belair
    Joined: Jun 1, 2005
    Posts: 58

    64Belair
    Member
    from Milford PA

    Hi there again guys, the hugh-mungo muffler is blown out on this car, its a 64 belair with a 250 six, would it be really obnoxious to run straight pipe on this thing? really loud and sound like crap?

    Or would a glasspack be better suited?

    I dont have much expierience with the chevy 6 bangers,

    Again, thanks for all your help!
    Jason.
     
  2. TIKIFREAK13
    Joined: Jan 19, 2004
    Posts: 443

    TIKIFREAK13
    Member
    from Duluth MN

    well i got a 62 Starchief & have had both a strightpipe & a reg muffler & a glass pack on it last summer its real low so keep ripping it off & stright pipe was way to damn loud muffler made it way to quite & robbed a lot of power & glasspack cherry bomb type made it right sound & didnt seam to rob power much buts its a 389 v8 6 cils sound great with a split manafold & dauls if you can do that but if just a muff go for a glass pack on a 6cil they sound wicked
     
  3. Kinky6
    Joined: May 11, 2003
    Posts: 1,765

    Kinky6
    Member

    What kind of sound are you wanting to get? I just ran a search for "exhaust" over on Inliners.org.

    A glass pack on a stock system will lower the sound somewhat. A Flowmaster 40 w/ single in/dual out seems to sound like a mild V8.

    Get some cast iron dual exhaust headers from Stovebolt Engine Co., then run one straight pipe, and one short glass pack as far forward as possible. You will be unbelievably obnoxious when you rap the pipes with this set-up.


    Happy Motoring! :cool:
     
  4. Mancuso Mayhem
    Joined: Nov 18, 2004
    Posts: 44

    Mancuso Mayhem
    Member
    from Houston

    I've got a 60 bel air with a 235 _ 6 in it and I got the exhaust running straight out the drivers side front fenderwell right behind the front tire with a glasspack on it and its not that loud at all still ... sounds liek an old tractor pretty much
     
  5. I think you can still get a header for that car...but not sure. If you can, run two pipes w/ one glasspack'd and one straight. The concept sounds stupid, but the sound is really cool.

    If you can't buy a header for it, I'm pretty sure your cast iron manifold can be split.
     
  6. TIKIFREAK13
    Joined: Jan 19, 2004
    Posts: 443

    TIKIFREAK13
    Member
    from Duluth MN

    i know the manifold can be split my dad did it to many trucks in 60-70s just takes a good welder .......
     
  7. El Caballo
    Joined: Mar 3, 2001
    Posts: 6,327

    El Caballo
    Member
    from Houston TX

    Isn't it supposed to be a 230 in '64? Looks just like a 250. Or, maybe it was replaced.
     
  8. RadirWheelsGuy
    Joined: Mar 19, 2005
    Posts: 245

    RadirWheelsGuy
    Member

    ya, its got to be a post 67 250 somone put in the car becuase its still got a dissconnected air pump with a plastic pulley and lines are still plumbed into the head. I guess it wont be so bad once i get all that crap out of there, maybe it will have a lil more power then the stock 230.
     
  9. Bondoboy
    Joined: Apr 14, 2005
    Posts: 648

    Bondoboy
    Member

    Better run a glasspack or 2. I had a straight 6 and with open exhaust it kinda sounds like a tractor. My friend has a 62 nova with a 6, and it has a split header, duals all the way back with glasspacks and it sounds bitchin.
     
  10. tatts
    Joined: Sep 17, 2004
    Posts: 281

    tatts
    Member

    on my 216 i ran straight and it sounded nice. dumped it out in front of the rear tire
    tatts
     
  11. lorin
    Joined: Feb 22, 2005
    Posts: 49

    lorin
    Member

    go with the glass packs. sounds great on a six.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.