Short Oil filter for SBF?

Anyone have a part no. or know the model, year etc. of the Volvo oil filter that fits small block Fords but is only about 2" long" I have a real clearance problem with steering clearance on my friend's 34 Ford with a 289.

 

This one is from a 1968-1984 Renault. NAPA #1335. Works just fine. I did this about 20 years ago on a guys Jaguar XK120 with a Ford V8. He never had a problem. Dean

 

Ford also had a 90* & 45* oil filter adapter - I believe the 90* is still avail from Ford Motorsports or SVO or Ford Racing or whatevery they're calling themselves these days...

 

Stole this from the HAMB a while back....

 

Good stuff guys. Any idea on the part no. for that 90 deg. adapter? That looks like it would work great!

 

Ragtop, the Ford part is # F4UE6884BA and it can be moved in any position

 

I run the filter from a 1988 Toyota 22r motor on my Y-block instead of a Fram PH8A. Same bung, same gasket size, just a smaller filter. I'll run out into the parking lot here at work and get the number off it in a few minutes. I had to change mine because of the steering as well.

 

240 volvo 4 cyl only half as long as the ford filter

 

Well glad that problems finally solved


.

 

I don't know exactly how tall it is, but a 60's-70's MOPAR spin on filter is about 1 3/4 " shorter than a Fram PH8A, Motorcraft FL1A, or a Wix 51515. Short Wix filter is 51068. By the same token if you have a MOPAR with lots of room you can substitute the taller Ford filter.

 

Thats the one I used. I only needed that extra inch clearance but wanted adequate volume.

 

I prefer oil filter relocation and full sized filter.

 

Another old-ass thread brought back to life by a FNG ... good thing I have a SBF custom goin' , so it worked out for me , lol !!

 

Fords always need help