Register now to get rid of these ads!

Help locating MOPAR wrecking/salvage yards

Discussion in 'The Hokey Ass Message Board' started by RCFlyer, Dec 18, 2011.

  1. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    I'm looking for a right rear fender for my 1939 Dodge D-11 4dr (see my thread in "parts wanted") and I've called a LOT of wrecking yards without success. Seems like some of you folks are early MOPAR guys and might have had some past success locating parts, so if you wouldn't mind sharing some contacts I'd really appreciate it. Please let me know if you've found yards out there with lots of old MOPAR parts. Thanks
    <!-- / message -->
    <!-- controls -->[​IMG]
     
  2. No Time
    Joined: Jan 13, 2011
    Posts: 20

    No Time
    Member
    from Oregon

    Seeing how you're in Washougal, you probably already talked to Wildcat Auto Wrecking in Sandy,OR, but just in case...http://www.wildcatmopars.com/.
    They are more into the 50's-70's stuff but they are into Mopar big time and might have a lead for you.
     
  3. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    Yep, called them a couple weeks back as they're the local "go to" guys for old MOPAR stuff, and you're right, they don't have anything that old. They gave me Moore's and Vintage Auto in Idaho. No luck either place (Moores has 4 Dodges, 4 Chryslers and one Desoto, NONE of which has a useable RR fender!).

    Thanks for the suggestion.
     
  4. Mr48chev
    Joined: Dec 28, 2007
    Posts: 36,054

    Mr48chev
    ALLIANCE MEMBER

    There are some guys with a yard between you and Goldendale that seem to always be advertising old stuff and saying that they have a lot of old stuff. I used to see their adds on Craigslist but haven't seen one lately.
     
  5. George
    Joined: Jan 1, 2005
    Posts: 8,000

    George
    Member

    There is/was a Moores in Sioux City that had Mopar stuff.
     
  6. Did you try talking with the guys from PlyDo?

    PLYDO
    Rt.1 Box 277-B
    Delbarton, WV 25670
    304-475-3245
     
  7. 41plym
    Joined: Jan 11, 2009
    Posts: 201

    41plym
    Member

    Try Dave Stromberg here in Vancouver WA. He's just north of the mall at 5 corners if you know where that is. (360)260-0434 He goes by Fat fendered relics or bufstuf on ebay. If you call him it sometimes takes a couple of tries, but he will get back to you. If not PM me and I will roust him for you.
    41plym
     
  8. Moores in Rapid City, SD?

    605-348-4926 they have a fair amount of Dodge stuff
     
  9. riskybiz
    Joined: May 27, 2009
    Posts: 146

    riskybiz
    Member

    RCFLYER, When I was restoring my 39 Dodge D-11S some yrs back, I found a wrecking yard that had a few 39 Dodges. Turner's Auto Wreckers Fresno Ca. 559-237-0918 And Weimar Auto Wreckers 530-637-5524. There was another larger wreckers in Fresno Whites Auto Dismantalers. I think they have closed their doors. I also parted out a D-11 I have all four fenders, trunk, both front doors. But I am keeping them just in case something should happen to my car. Good luck and I hope this helps you find a fender. :D One more. Don's Antique Auto Parts 510-792-4390
     
  10. George
    Joined: Jan 1, 2005
    Posts: 8,000

    George
    Member

    That's the one I was thinking of!
     
  11. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    Yep, "Howards Wrecking Yard" in Underwood, WA. Talked to him last week and he doesn't have anything. He's actually closed for the winter (opens again March 1st) but he still takes calls and he knows his inventory really well. They have about 1,300 cars but he doesn't advertize on the web so he's hard to locate. His phone is 509-493-2814 if anyone can use it.
     
  12. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    Talked to Moore's a couple times. They have 4 1939 Dodges, 4 1939 Chryslers and one 1939 DeSoto (not on thier site) and NONE of them have a useable RR fender! I was shocked when they told me that: 0 for 9!
     
  13. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    I haven't tried either one of these, so I'll call them today. Thanks for the leads!!
     
  14. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    I talke to Dave - had him make me a trim pice for the cowl last summer - and he didn't have anything, but he gave me a lead in Vancouver. WA for another gentleman. Called that guy and he didn't have a fender, but he does have bumpers, a deck lid and other misc. pieces, none of which are on my "needs list", but if anyone else out there has a need send me a PM and I'll forward the phone number.
     
  15. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    I've talked to PLYDO in the past and they have a lot of cool stuff, but no fender.

    BTW - I love your Franklin quote! I've added "and don't trust any beer you can see through"....
     
  16. 66Newport
    Joined: Dec 12, 2008
    Posts: 2,795

    66Newport
    Member

    Try CTC Auto Ranch in Denton, Tx. They have tons of stuff.
     
  17. RCFlyer
    Joined: Jan 2, 2008
    Posts: 8

    RCFlyer
    Member

    FOUND A FENDER at Turners Auto Wrecking in Fresno, CA. Some surface rust, one small crack by the bumper support opening, one small crack at the bottom edge under the ribs - LOOKS GREAT!! Good folks to talk to, great price, reasonable shipping, so all-in-all a great transaction.

    Thanks for all the help guys, especially "RISKYBIZ", couldn't have done it without all your input!

    Merry Chrstmas and Happy New Year to everyone - it's going to be a happier New Year around here!!

    Bob
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.