32,33,34 pickup chop pics needed

I know there is a thread with pics but I would like see pics with the amount of chop listed. Im leaning toward 4" on mine but still havent cut yet Thanks Guys Elroy

 

Mine is chopped 5"

 

Not sure how much I think 4 my next project

 

No chop. I think Henry nailed the proportions perfectly.

 

elroy post a pic of what you have. also, how tall are you? bubba67 - PU looks great but, want to see it when seats and steering wheel are in it and you sitting in it.

 

4 out of back and 3-3/4 out of the front on this one, they look funny to me when they are chopped strait, it sounds funny that 1/4 can make a difference but trust me it does.

jeff

 

Here's a 4" straight chop that I had done several years ago. The rear window was only chopped 2" by taking a bit of metal above & below it, made driving a bit nicer when you can see everything.

 

nice looking truck bubba, i had to do a double take! the blue one was cut 6" and the one in metal is 4"

 

I did mine 3."

 

4''

 

Nice truck

 

Here's mine with a touch under a 6" haircut. I dropped my dash 3/4" to get a little better visibility.

 

I chopped my first one 2.5" not enough, second one 4". (Oct. 05 R&C) For my size it was to much but it did look good, My current one is 3 and I like it. I'm 6.2 X 260, I shouldn't be building another truck!

 

Bubba Looks great,Hope to see it at next years Toys for tots at Waynes I have a 34 cab for sale chopped 6in check my album for pics, Thanks Lucky

 

First one is my '33...5" chop
Second one is my '34...3.5" chop

 

Here's mine with a (I believe) 4 inch chop on it. Might come a touch lower to clean up some poor welds and cut gaps by the previous owner..

 

Mine chopped 5" should have done 4" little more room would have helped.

 

Great thread, love these trucks!!

 

Wow bubba your truck has the look. I will try to post a couple pics tonight. Im 5'2" soo i could live with anything. I just think the "right" chop looks like a bad*** flattop on a marine too high and hes gomer pyle.
My parts pile is
34 cab,hood,grille
40 banjo with stock drums and QC
35 wire wheels
21 studwith truck 4speed 1945 overhaul
55 f100 frt brakes with spacers for wire wheels
f1 shock mounts
40 spindles with bolt on arms
32 steel frt fenders
40 split wishbone
I will soon build a 32ish frame

 

I believe 4 inches although looking at some others it could be a little less.

 

5" chop and 4" channel on ours

 

this is Scott Hammon's 32, chopped 4" cowl stretched 4" and the body set back on the frame 4". Was a drag racer so that's why the body relocation.

I know it's 4" because we used masking tape for measurements and all we had was 4" tape.

Mick

 

Here's mine - chopped 3.5 inches.

 

Don't chop it!!!

 

Your old truck was a big inspiration to me when I was forming my vision of what my blue '33 would look like !

 

3 1/2 Inches

 

4 inch chop, 9 inch channel, done in the 60's.-MIKE

 

4 3/4" here

 

Here's my '34 chopped 4" but I stepped the chop in the back and only chopped the rear window 3"