Let's see some 32-34 fenderless car/truck pics!

Love that fenderless look but need to see some pics so I can get some direction and ideas on my 32 Ford Pickup project! Finished or unfinished let's see what you folks got out there in the H.A.M.B!!

 

My ratty ol' 33.......

 

Looks good Rocky!!

 

Here you go

 

Damn... I'd love to have a beater 32-34 truck like that...

 

Pin striping looks good with those whitey's!

 

Fender free is for me! Keep em' comming.

 

my 32

 

Lookin great WDO40! Is that a smooth hood on there and did you channel her at all?

 

Here's mine.

 

Black and white pic is sweet!

 

Here's my '34, before getting torn apart.

 

Is your pickup channeled at all and is that a smooth hood?

 

Do you have some new plans for your 34 Speedy Canuck?!

 

There is another thread exactly like this, but in the spirit of shameless self promotion, here's another shot of mine taken by Buddy Palumbo at a HAMB gathering last year. Also, there's a couple of old pics, just to show that this style did go back aways. Oh, and another with the new tailights.

 

I sure do. I decided that I had too much extra room in the garage, so...



haha. Just kidding. The plan is as follows:
I have a 50s period build in mind with 1957 as my cutoff date. Unless the part is necessary for safety, or is a reproduction of a part made in the 50s, there won't be much noticeable on the truck newer than 1957.

That being said, my plans for the ch***is are the original '34 front axle and transaxle spring out front, split wishbones, '40 Ford brakes, 1957 Ford 9" rear, quarter elliptical leaf springs in back, and 1940 Ford steelie rims and blackwall piecrust's all around.

A 1954 Olds Rocket 324 and matching Hydromatic transmission are going to be shoehorned between the rails for motivation. That'll require some work on the firewall to make it fit, but I think it'll be worth it. An early F1 steering box and column is going to free up a bit of room over the stock unit as well.

The cab is chopped 4 inches, but may have to come just a touch lower to clean up some poor work that was originally done. There's some gaps visible from the inside, where they didn't make the cuts right. Stock bench seat with a leather/cloth tuck and roll upholstery. 1940 Ford dash and gauges with a column mounted 50s tach...

The tear down thread is here: http://www.jalopyjournal.com/forum/showthread.php?t=559727

 

I know neither one is a ford, or 32-34, but here is my fenderless 30' Chevrolet coach and 35' IHC pickup. Both late 50's early 60's inspired.

 

Good luck and keep us posted! So if you are going with wishbones what's going to happen with those radious rods???

 

That's ok there all cool! Doesn't matter what the make is, still gives us ideas!!

 

What about paint? I would ***ume since your going to repair the cab you will be doing some painting.

 

That's it guy's, thought there would be more out there!!

 

Not quite sure what you mean... I plan on splitting the original wishbone that's on the front axle.

Paint will be getting changed. I don't really like the white/maroon combo that's there now. Haven't decided on a final colour scheme yet.

 

I just thought you meant you were taking the radious rods off and using wishbones. I know what you mean thou. I haven't checked out your thread on this project yet I will do that right now. Good luck can't wait to start on mine.

 

yes it is a smooth hood and no channel