It's a quick and ghetto picture but can someone take some measurements off their car so I can double check them against mine? I need the measurement between the 2 center door pillars and the measurements between the rear edge of the center pillar and the front edge of the rear door jamb and the same with the front door opening.
Door openings are not parallel from top to bottom. Neither are the center pillars. Where (vertically) do you want the measurements taken from?
The floors are rotted and I just want to make sure everything is where it should be before I weld in braces. The pass side is a little off (door sticks and it isnt the strike) so I want to take care of that first.
The Jalopy Journal
