Register now to get rid of these ads!

Finally brought 'The Rumbler' home.

Discussion in 'The Hokey Ass Message Board' started by Brootal, Jun 30, 2005.

  1. Finally brought the Rumbler home yesterday. Had some problems with fuel blockages (I think). Forgot to replace the old filter and ended up with a fair bit of sediment in the carb. Not sure if that would cause it to stop, but it wasn't realy happy.

    Got a new filter on it and fired it up and everything seems OK, but it's absolutely POURING DOWN at the moment, so I'm not game to go out and test my luck.

    Anyway, some pics...

    The engine... back where it belongs. I mean... it did look nice on the engine stand and all, but I've got stairs from the garage to the lounge room and it would've been too hard to cart it up there, so I put it in the engine bay instead.

    [​IMG]

    T'other side...

    [​IMG]

    The amazing fan shroud...

    [​IMG]

    Here's a shot of the remote oil filter that I have to run to clear the steering box.

    [​IMG]
     
  2. My new 'twice pipes'

    [​IMG]

    You can kind of see from here how the angle cuts follow the angle of the bumper.

    [​IMG]

    ...and back in the shed...

    [​IMG]

    Not bad considering this is how it looked at 4:08am on Saturday 18th of June. i.e. the day before deadline...

    [​IMG]
     
  3. tysond
    Joined: Dec 6, 2003
    Posts: 335

    tysond
    Member

    Looks good to me.
    "You can kind of see from here how the angle cuts follow the angle of the bumper"
    That's being a bit fussy isn't it. hahaha.
     
  4. jimbob
    Joined: Jun 29, 2004
    Posts: 1,222

    jimbob
    Member

    "Not bad considering this is how it looked at 4:08am on Saturday 18th of June. i.e. the day before deadline..."

    No wonder you didn't finish it, wastin time takin photos
     
  5. hey man,

    killer killer killer!

    fucking awesome job!

    danny
     
  6. aedan
    Joined: Oct 18, 2004
    Posts: 524

    aedan
    Member
    from ###

    you got that right

    lookin good mate the engine looks sweet
     
  7. rumblytruck
    Joined: Mar 15, 2005
    Posts: 102

    rumblytruck
    Member

    Great lookin' little car! Love the factory "douchebag" hangin' on the fenderwell. Motor looks great! I've had a couple of Ramblers, a '66 and '69 before and been eyein' a 2 door ragtop in a local backyard for a couple of years. What have you got going with the steering?
     
  8. HotRod60F100
    Joined: Jul 13, 2004
    Posts: 1,196

    HotRod60F100
    Member

    [​IMG][/QUOTE]


    Nice MAD MAX stare ya got going there Broot :D ,Glad yer Rompin Rambler's back in action :cool:
     
  9. monsterflake
    Joined: May 13, 2003
    Posts: 3,763

    monsterflake
    Member

    something didn't look right...it's fixed now!
     

    Attached Files:

  10. Grampa would be proud of ya, boy-o. :cool:

    Every time I see the Rumbler I think of a song by Deja Voodoo (I think... I'm getting old, brain's not functioning anymore)

    "I got a 1969 Rambler American, baby aren't you impressed
    Sure I could have a Datsun 280Z, but I ain't like all the rest

    You're gonna flip when you see that highway line
    Rolling by through the hole in the floor

    Come on and hop in the passenger side baby
    But be sure you really slam that door..."


    I could go on...



    :D
     
  11. Last time I saw that car, it was on the back of a trailer, at the drags, looking very much like a "TRAILER QUEEN", I figured you'd got the shits and sold it for Beer money.

    Seriously though, that motor looks great in the engine bay. Were the screens out to get the whole car painted, or has the trip to the salt made you drive at subsonic speeds knocking out the glass.

    Bob
     
  12. Trailer = Broken, you know that. :)

    Glass WAS out to fix up the paint, but I've put them back in (did it at the drags actually) without any sealant so I can drive it around for a couple of weeks before taking it to the panel shop for a complete re-do. It'll be basically the same, but I've got plans...

    Nice day today, going to take it out for a spin. See Ya!
     
  13. All I saw was the dent in the back panel!




    You're a sad sad man Boris.....
     
  14. touchdowntodd
    Joined: Jan 15, 2005
    Posts: 4,068

    touchdowntodd
    Member

    man, i wanna run a fan setup like taht in my sled, do away with my worthless 4 blade fan..... would be REAL kool.... should work too.,... i need more cooling poiwer, this 4 blade isnt doin JACK... any other guys out there with no fans on the block?
     
  15. You need to READ THIS

    :)

    Big A - Can 't say I know that song. Sure sounds cool though... I think...

    Peddro - You're gay.
     
  16. Can you say "ROAD TRIP", Johns perhaps?

    Looking good.....
     
  17. hey Boris very sano install mate....nice work !!

    You did a great job and hey, nuthin wrong with THAT colour ....infact, Im kinda partial to it !!

    Rat
     
  18. No, you are...


    Sounds like Frank wants in to the GAMB Boris....?!
     
  19. Very cool Boris, looks nice. The engine detail is killer!
     
  20. autocol
    Joined: Jul 11, 2002
    Posts: 589

    autocol
    Member

    NO NO NOOO!!!!

    you can't show a picture of THAT side of his face! he's like george michael! :D
     
  21. Took the car into the panel shop on Monday. Dropped in to visit this morning and give them some bucks.

    These guys don't stuff around. Majority of the bad rust is fixed and it doesn't look too bad. No show car job, but it should look OK as I go flying past. :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Can't seem to find my 'before' photos of the fender lip...
     
  22. jimbob
    Joined: Jun 29, 2004
    Posts: 1,222

    jimbob
    Member

    "Can't seem to find my 'before' photos of the fender lip..."

    Like I said elsewhere, bit hard to take a photo of nothing mate.
     
  23. Damn these ramblers seem to be everywhere........

    Oh hang on its the same one :D

    Boris you are such a forum slut.......

    Flake, flake, flake.... you gotta do it, my EK will be sporting candy and almost flake (very chunky metallic but not quite flake) roof. Can't beat it!
    Should look good when done.
     
  24. You forgot to tell them to weld up the back doors........

    BTW, which are the back doors?
     
  25. I would have thought you GAMBers would be rather familiar with back doors by now!!!!!!

    Cheers,

    Drewfus:D
     
  26. THERE CAN BE ONLY ONE! (said in a bad Scottish accent). :)

    Peddro? WTF you talking about?

    Drewfus - The back doors at my place are all one way. EXIT ONLY!!!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.