Pedal assembly

I need of some advice on what brake pedal ***embly works best in a 1948 GMC pick up?

 

try this one
http://www.speedwaymotors.com/1947-1954-Chevy-Pickup-Power-Brake-Pedal-***embly,8903.html

 

I used the stock pedal and power brake conversion, only took 20 minutes start to finish.

 

Stock frame, S-10 Frame, Subframed Or????

With a stock frame the original pedal ***embly works if you use a booster/master cylinder setup like Noname showed or build a bracket to mount the master cylinder.

If you have the stock frame and don't have any pedal ***embly the setup from speedway probably will run you less than gas for hunting a stock ***embly or ebay and shipping will especially if you run an automatic.

I don't have power brakes at this time and built a bracket that bolts on in place of the stock master cylinder and mounts a 68 C-10 drum brake dual master cylinder for my drum front and rear setup. I had to fab the bracket and build an extended brake pushrod that was stout enough so it wouldn't flex or bend.

 

if your running a stock frame i might know of a guy who has one,