wiring harness Classic Instrument

I got my gauges and started to install them but the manual that came with them does not show or tell how to connect this 10 pin harness that goes to the tach/speedo. Went on line and they show the same as the manual does, And it being Saturday no one to help. I need to know what color wire go where.

 

Btt

 

little more info please, electronic speedo? speedtachular ,what set did you buy

 

I have the hot rod series HR32slc, and yes it is a speedtachular. I have the quad gauges done just need to get this harness for the speedtachular

 

I have the hot rod series and used page 13 on this guide.
http://www.cl***icinstruments.com/UserFiles/File/Installation Manual 111610B.pdf

Does yours have the black box that you connect the gauge too?

 

If you have a black box it would speak for itselve one side is used for tach the other for the speedo ,they should be provided with telepfone cable to connect the speedo to the black box, for speedo sig i bought the gps module ,works great

 

thanks guys but I have already been to the web site and I don't have a black box or the sn72 board that the web site talks about.

 

what are the connections on the back side of the gauge?

 

See if this will help..........

 

Thanks themoose that is what I have been looking for. I hope to get this wired in later today. Have to go eat whit the little lady and some friends. Hope to get some up dated pictures loaded in the next few days.