Features 1962 Ranchero REAL Shop Truck build...any others...

teflon taped all the joints, and installed the clamps, also used the old skoool pain in the **** T bar valve cover hold downs, had to cut off 3/8" every one, I hope to be driving this, this weekend...

 

What adapter works and where did you get it from? Im wanting to put a 5spd behind my 170 in my 64 falcon wagon.

Sent from my SGH-T959V using Tapatalk

 

Click here, you just pick what ya need, Call Bruce, hell of a nice guy....tell him John Howard Ohio Falcon Club said hello....

http://www.safepay.net/cgi-bin/shop...xt&category=Adapter***erchant=moderndriveline

 

What if I have an automatic in it now? Do I need to find a used 3spd bell housing or do theu have them too? Trying to go the cheapest route

Sent from my SGH-T959V using Tapatalk

 

Yep, your gonna need that and the clutch, flywheel, and pedal ***embly with linkage. You also need to know if your engine has ever been replaced and what year it is if it has, because there a couple different flywheel, clutch and bell housing possibilities that would use one of two different adaptors. But, it will be a m***ive improvement over you automatic as far as drive ability goes, especially if you have the Ford-O-Matic 2 speed.

 

I just got sent here off the falcon page.. I was curious at seeing the shifter location on the top side. only pic i saw was from pedal view.

 

I have extra bell housing, fly wheel, clutch...buy the adapter and disc....then pedals. Not a cheap thing to do from scratch....pedals going 100-200 a set....

 

Got it about all hooked up, Oil-coolant-return spring, clutch spring, speedo cable, trans fluid and exhaust pipe...ready to fire......

 

Sweet !!

 

looks awesome post a video when you fire it up! Lets hear it

 

I am going to have dauls installed later, now, Stock quiet muffler....all the way back, was new 2 years ago..........

Now, gotta to ****** fluid, rear end oil, bolt shifter down, weld a small hole in exaust pipe, and I will be ready to fire it up....Hope to have video up later

 

Video:

 

saw daylight today....been awhile......

 

Back together, "new" rear end in, need a couple of weekends to finish it up, but hard at work on my 64 Sprint....

 

Changed the wheels, Slots tires were to big, found the OLD chrome reverse wheels that still took the stock bub caps, had 4 new Goodyear 13" tires....I like it!

 

Looks good JW. Did you get those wheels at Louisville?

 

Looking and sounding great!

 

Hi falconwagon62.Lookin` good.Nice to see someone who appreciates the 200ci six.Makes good power,reliable.will run forever if properly maintained.Easy on gas too.IF you keep your foot out of the two end carbs.Hehehehe.But then,what fun is that?
Good luck.Have fun.Be safe.
Leo

 

Yea....got them in Louisville!!! anotrher reason Falcon dudes needed to be there!!! and woodbutcher, my granny and grandpa lived in LaFollette for 30 years....grandpa buried in Clinton.....like being home.....did they get I-75 fixed yet?

 

Hi Falconwagon62.Yep the super slab is fixed,,,,,,,,,,,,,,for now.Hehehehe.
Good luck.Have fun.Be safe.
Leo

 

Got the insides all done, only gotta install my stereo speakers then DONE....

 

Nice! I bought those same door panels for mine!

 

does theodern drive line clutch kit come with the throw out, disk ,and pressure plate ?

 

Looks good, but I have to say I liked the slots mucho better personally

 

Funny, I have a set of slots for my Ranchero/wagon replacement I've been thinking about...