1935-39 X-member in 32 rails.......?

i have been searching for over an hour on this topic and have not found anything on this,

I am in the process of gathering therest of my parts for my 31 tudor, it consists of 31 tudor on 32 rails, model A front crossmember, 36-39 drums and wheels, 39 trans, flathead, 39 pedal ***embly, dropped axle split front bones, 38 rear axle unsplit, 40 ford backing plates,


My questions are, has it been done? is it too long/wide? any help and pictures would be appreciated. Thanks

 

I believe mine is a 36. Should work.

 

Brian B***' 1929 Model A roadster thread:
http://www.jalopyjournal.com/forum/showthread.php?t=263380

Brian B***' 1929 Model A coupe thread:
http://www.jalopyjournal.com/forum/showthread.php?t=104314

Brian B***' "The Wade Coupe" 1931 Model A coupe thread:
http://www.jalopyjournal.com/forum/showthread.php?t=336494

I'm partial towards B***' threads but there are plenty of other threads on here that have shown X-members in deuce rails. I'd begin in the tech archives and look through the build threads for what you're looking for..

http://www.jalopyjournal.com/forum/showthread.php?t=647056

 

thanks for the info ,

 

33-34 and 35-36 were the favorites in the old days for As and Bs.

 

If you use a '39-'40 Ford (or Mercury) X-member, then the hydraulic brake pedal ***embly is a bolt in. Pedal arms need to be heated and bent, but the ***embly will bolt to the X-member. '33-'34 and '35-'38 Ford will require a bit more work as they had mechanical brakes.

 

This isn't Apples to a Apples but it's my A ch***is with 36 X member, 39 trans mount and 39 pedals. Took some messing around but looks good and works grate. I did a few other "adjustments" while I was at it.
The Wizzard

 

1932 frame under my 31 roadster.

 

B***, thanks for the inspiration, i read all of yor posts, i found a 35-38 frame and bought it today for $270, totally complete, has a 39-40 brake pedal ***embly on it, it has been modified for them.

Thanks to everyone else for the pictures and replies! it sure does help, and it is appreciated.

 

http://www.jalopyjournal.com/forum/showthread.php?t=460730

here's mine--post 10 has ch***is pics. 34 rails narrowed to 32 dims with 4o xmember