Register now to get rid of these ads!

Just a Nice Guy with a Rust Question.

Discussion in 'The Hokey Ass Message Board' started by iammarvin, Apr 28, 2012.

  1. iammarvin
    Joined: Oct 7, 2009
    Posts: 1,196

    iammarvin
    BANNED
    from Tulare, Ca

    Had the opportunity to take a nice widowed lady's car out to a small c
    hurch sponsered show today. Had a good time and won a best of show!
    Heathy small block with a 4 speed = Fun to Drive!
     

    Attached Files:

  2. iammarvin
    Joined: Oct 7, 2009
    Posts: 1,196

    iammarvin
    BANNED
    from Tulare, Ca

    Now for the question. What is the best way to remove some pitted rust and light surface rust from the chrome bumper ends without hurting the rest of the chrome?
     

    Attached Files:

  3. 49ratfink
    Joined: Feb 8, 2004
    Posts: 19,242

    49ratfink
    Member
    from California

    I'd use an SOS pad.
     
  4. junk yard kid
    Joined: Nov 11, 2007
    Posts: 2,717

    junk yard kid
    Member

    some say to use water and tin foil.
     
  5. easyissy
    Joined: Mar 23, 2011
    Posts: 133

    easyissy
    Member

    WD-40 and steel wool.
     
  6. Tony
    Joined: Dec 3, 2002
    Posts: 7,350

    Tony
    Member

    0000 steel wool..
    Works very good and will not scratch the finish.
     
  7. damagedduck
    Joined: Jun 16, 2011
    Posts: 2,341

    damagedduck
    Member
    from Greeley Co

    brass wool & thick paste wax,been using it for years with NO ill side effects-chuck
     
  8. Stu D Baker
    Joined: Mar 4, 2005
    Posts: 2,793

    Stu D Baker
    Member
    from Illinois

    Not trying to be a smart ass, buuutttttt,...what kind of a car show gives out a Best of Show to a car with rust pits on the bumpers? In reality, those bumper ends may need a rechrome to totally cure the problem areas. I'd try some of the above ideas first, since they tend to be pretty straight forward. Good luck. Stu
     
  9. Wood bleach or oxalic acid. Soak a rag put it on the bumper and keep it wet .
    You could also try aluminium foil and warm soapy water.
    Google those for rust removal and you'll see how it works and how to do it.
     
  10. Squablow
    Joined: Apr 26, 2005
    Posts: 17,759

    Squablow
    Member

    Buffing compound or a good chrome polish like Flitz or Simichrome. Steel wool will scratch the surface. I don't care how many 'ought' it is. You're rubbing balled up bare steel against a plated surface, bad idea. Same with tin foil.

    If you had a super old, crusty bumper that you were trying to get a last hurrah out of before replating or something like that, I'd be OK with SOS or similar, but those bumpers only have a bit of staining and steel wool would be unnecessary. Wood bleach is actually another good suggestion, although it works better on disassembled parts in a soak tank, a wet rag would probably do it.

    When you're all done, give the bumper a good coat of wax to help keep it from getting rusty again.
     
  11. rrthiv
    Joined: May 3, 2011
    Posts: 84

    rrthiv
    Member
    from S.E.Ohio

    000 OR 0000 steel wool and a good paste wax...
     
  12. damagedduck
    Joined: Jun 16, 2011
    Posts: 2,341

    damagedduck
    Member
    from Greeley Co


    HERE'S THE ONE THAT I'M DOING:::::

    http://www.jalopyjournal.com/forum/showthread.php?t=693523

    and it's working pretty good,
     
  13. Dat Dirty Rat
    Joined: Jan 15, 2003
    Posts: 3,505

    Dat Dirty Rat
    Member

    Lol...sorry...you guys call that rust??? Come to NY....RLMAO...all jokin aside...nice looking car!....i was going to say rust bucket. :)
     
  14. hemifalcon
    Joined: Mar 20, 2008
    Posts: 380

    hemifalcon
    Member

    Mother's wax aluminum polish works great.. Whether you're polising aluminum, chrome, stainless, or even plastic headlight lenses.. Give it a shot-- Those bumper ends do need rechroming though.. Use the Mother's--than put a coat of wax on them and buff them dry..
     
  15. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,788

    tfeverfred
    Member Emeritus

    Turtle Wax brand chrome polish and rust remover. It works!
     
  16. Rusty O'Toole
    Joined: Sep 17, 2006
    Posts: 9,710

    Rusty O'Toole
    Member

    Copper scrubbing pad and Pledge to remove rust stains. Then wipe clean, and polish with Flitz, Simichrome or your favorite chrome polish.
     
  17. comet (original powder form) bathroom cleanser does wonders on rusty bumpers wont complety kill it but will remove it and keep it away for a while (months) with weather exposure maybe years being garage kept
     
  18. firingorder1
    Joined: Dec 15, 2006
    Posts: 2,147

    firingorder1
    Member

    When you remove the rust save it. There's a huge market for "patina". Sells for a lot more than "rust".
     
  19. Rick Sis
    Joined: Nov 2, 2007
    Posts: 710

    Rick Sis
    Member
    from Tulsa OK

    Reality check: Polish it all you want and the rust is still going to steadily progress. Chrome work is expensive now, and costs will continue to rise drastically. As the pitting worsens, the costs skyrocket. This car needs all the chrome pieces preserved. Get them fixed. For something like this, there is really no alternative.
     
  20. stuart in mn
    Joined: Nov 22, 2007
    Posts: 2,489

    stuart in mn
    Member

    I agree. Use some polish, don't use steel wool.
     
  21. :D I will 2nd that!
     
  22. iammarvin
    Joined: Oct 7, 2009
    Posts: 1,196

    iammarvin
    BANNED
    from Tulare, Ca

    A small, church sponsered car show with voting by kids, grandparents, and anyone who wanted to pick out a favorite, that kinda car show.:D
    Thanks for all the advice everyone! I can't afford to rechrome the tips for her but I can polish them up to slow down the process.
     
  23. gregneun
    Joined: Jun 5, 2010
    Posts: 26

    gregneun
    Member
    from SoCal

    Wenol or Glanol, it's the same stuff. Buy a tube of the red and the blue and use a soft cloth. Really, Wenol, google it or go buy it on ebay.

    Greg
     
  24. Steve Ray
    Joined: Mar 2, 2001
    Posts: 694

    Steve Ray
    Member

    CLR followed by a good polish.
     

  25. Not steel wool it will leave behind rust.
    Use some brass wool.
    You can find it at boat shops.
    You may also find it at Home Depot or Lowe's
    I use brass wool and car polish.
     
  26. iammarvin
    Joined: Oct 7, 2009
    Posts: 1,196

    iammarvin
    BANNED
    from Tulare, Ca

    Thanks again guys! This is a really nice 57. I wish I could do more. I did throw out the triangle sponge filter on it and put on the 14 inch finned one, I really do not want to see this car go up in flames with her in it. She is that nice! When I asked her if she could drive a 4 speed......she gave that "Look" and said "I learned with a 3 on the tree"........ I said " I'am sorry", she just smiled.
     
  27. tubman
    Joined: May 16, 2007
    Posts: 7,337

    tubman
    ALLIANCE MEMBER

    I'm with the guys who say nothing more aggresive than some quality polish and a cloth. It may take longer and be more work, but I'll bet that will clean up just fine. Only after you have exhausted the "gentle" approach, should you consider something more aggresive. That car is too nice to go after a quick solution. I would rather see a generator, and Chevrolet (early Corvette maybe?) valve covers, and air cleaner though, but that's just me.
     
  28. I 2x!
    I recently got introduced to this stuff and it works awesome!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.