eelco man-a-fre linkage

Anyone on here running eelco linkage on there man-a-fre intake ,picked up the set with extended throttle shafts but no instructions sure could use a picture of it installed.Any help appreciated

 

This might get you started.

 

This is a unit we had in here a few months back. It may help you somewhat. Thanks, Gary in N.Y.

P.S. There appears to be one rod missing, but this the way it was sent here. The missing piece may have been with us but not when the photo was taken.

 

Thanks guys thats like the factory linkage,this eelco linkage doesnt use the center pivot bar,it has a plate that bolts on the rear of the base of the pass front carb ri think,but im not sure , if i put it on the rear carb it will hit the distributor.thanks again for the pics.Ill have to #%% with it for awhile to figure it all out.

 

Not sure of your linkage since there is no pic, I am fighting with a set right now, I have been told that I need the actual original linkage to get my setup working correctly but I think I can get pretty good results with this setup. Here is a pic on what I got going on.

 

Just a suggestion, I find all sorts of good photos of
different kinds of linkage on Ebay....Search 4x2 or
Man A Fre every other day or so, and you will find
all sorts, might give you the view you need to make
yours work. I have also had very good luck asking
the guys questions about the setups they are selling,
most come back with good answers. There are many
sellers that specialize in multcarb setups, have shops,
and just use Ebay for exposure, there are a wealth
of sources there....whether you like Ebay or not !!!!

I also have Eelco linkage for 4x2, with throttle
rod extenders, but they are for the Ford/Holley/
Stromberg type carbs....I don't know that the
chevy carbs on your manifold use them...

 

will this help