rearend widths

What rear axles are narrow enough for open-wheel Tbucket size cars?

I've heard S-10, early Mustang...

How wide are they?

I prefer the look of round-back housings (like early Olds, 8 3/4 etc)

 

Here are some axle widths. Got the info here on the 52-59 Ford group.

Ford Outside
Width----Year------Model
56.50--1969-1977 Maverick 8"
57.00--1974-1978 Mustang II 8"
57.25--1957-1959 Ford, Ranchero, Station Wagon
57.25--1965-1966 Mustang
58.00--1966-1977 Bronco
58.00--1964-1965 Falcon
58.00--1977-1981 Granada/Versailles
58.50--1977-1981Versailles
59.25--1967-1970Mustang, Fairlane, Comet, Cougar
60.00--1967 Cougar
60.00--1958-1960--Edsel
61.00--1964-1971 Ford Full Size
61.00--1949-1951 Mercury
61.25--1957-1972 Ford F-100 Pickup
61.25--1960-1964 Ford Full Size
61.25--1971-1973 Mustang
61.25--1967-1973 Torino, Ranchero, Fairlane
63.00--1970-1979 Ranchero & Torino
63.00--1972-1979 Ford Full Size & Intermediate
63.50--1967 Fairlane (Coil Springs)
65.25--1973-1986 Ford F-150 Pickup
65.25--1978-1986 Bronco
65.25--1973-1986 Ford Van 3/4 Ton
68.00--1972 Ford Van 3/4 Ton
69.25--1977-1986Ford E-150 Van

Outside
Width----Year-------Model
54.25--1983-2004 Chevy S10 2WD, GMC S15 2WD
57.75--1962-1964 Chevy II/Nova
57.75--1965-1967 Chevy II/Nova
58.00--1978-1988 Chevy Malibu, Monte Carlo
59.50--1968-1982 Corvette
60.00--1955-1964 Chevy Car
60.00--1967-1969 Camaro
60.25--1968-1979 Chevy II/Nova
60.50--1984-1995 Corvette
60.50--1964-1967 Chevelle
62.00--1955-1959 Chevy Pickup
62.50--1968-1972 Chevelle
62.50--1970-1981 Camaro/Firebird
Mopar Outside
Width----Year------Model
55.60--1960-1976--7 1/4 A-body
55.60--1973-1976--8 1/4 A-body
55.60--1966-1972--8 3/4 A-body
55.60--All--8 3/4 A-body
56.00--1932-1934 -All Mopars
57.40--1963-1977--8 1/4 A-body
58.54--All--8 1/4-F-body
58.54--All--8 1/4- M-body
58.54--All--8 1/4- J-body
59.00--1935-1936-- All Mopars
59.14--1966-1972--9 3/4- B-body
59.20--1962-1972--8 3/4- B-body
60.00--1937-1948-- All Mopars
60.70--All--8 3/4- E-body
60.70--All--9 3/4- E-body
62.00--All--8 1/4- B-body
62.00--1971--1974-8 3/4- B-body
62.00--All--9 1/4- B-body
63.40--All--8 1/4- C-body
63.40--1971-1974--8 3/4- B-body S.W.
63.40--Al-l-9 1/4- C-body

 

Nice work man. Helpful chart!

 

First you need to figure out what wheels you plan to run.

Ford patterns will narow that chart down quick.

Many use the 66-77 Ford Bronco at about 58"

 

Thanks, but it was Retro Jim that compiled this, I just copied it.

 

Here's a link to a helpful chart for donor rearends:
http://www.carnut.com/specs/rear.html

 

Banjo Ford. Done.

 

thank you, just what Iwanted

 

Get your wheels and tires first then figure out the type rear-end you want to use and cut it!

 

any one know if the 81 bronco rear end has a centered yoke or not

 

You can also look under www,quickperformance.com under specifications,also have a list of donor axles with measurements for overall length and some from backing plate to backing plate.