PPG. Dry time between coats ?

How much time between coats at about 75 degrees

PPG Shopline JAU
Acrylic urethane.

Is humidity a problem?

Thanks,
Bob

 

Bob go back to your PPG dealer get the P-sheet on the the product. I would give about 2 hrs if your around 80 percent, more is better, try not to pile it on.

Good luck............STEVE

 

PPG product sheet JAU Direct Gloss Acrylic Urethane

Dry times between coats
5 - 10 minutes at 70ºF (21ºC)
Air dry
Dust: 45 min
Tack:3 to 5 hours
Tape: 12 hours
Dry:16 hours at 70ºF (21ºC) to polish and put into service
Clear: 4-6 hours

Force dry
30 minutes at 140ºF (60ºC), wait 8 hours to
polish and put into service.
IR 10 - 15 minutes