12v chevy generator grease ports

i have a rebuilt 12v chevy generator charging good. my question is the grease ports to the bearings look dry, should i grease them with bearing grease or do you use something else?

 

They just need a few drops of oil every now and then. I use 30wt

 

i have only seen oil cups which i put a couple drops of oil in. can you post pictures of the grease ports?

 

real hard to post picks for me, but thay are cups more then ports.

 

Like tb33 said a coupla drops of 30 Wt

 

cool thanks

 

The common maintenance procedure was to use a few drops from a dipstick when you changed your oil. When you checked the level after a fresh oil change. Use the stick to add a few drops. It doesn't take much. Over oiling can cause a bigger problem than forgetting to oil. If you are lucky enough to have an early distributor, with the oil cups, then the same procedure applies.