Mallory Mini Mag

Hello all, I have a Mallory Mini Mag PT. NO. Mag 310 L, it came with a Mini Mag Transformer PT. NO. 26049B. I know the Mag is for a sbc, what I have no idea is how to hook it up. I've seen and read about the Power Pack and Drag Pack setup but nothing on the Transformer I have. The other question is looks like the Mag has a bronze gear for a roller, if I was to use a solid or hydro cam will I need to change the gear? I also have a unidentified "Pruned" 671 Blower and manifold ( I'll post pictures in another post to see if anyone can help i.d. it) Plans are a accurate 60's buildup of a 283 or 327 using my blower and Mini Mag. Any help and or advice is greatly appreciated.
Thank you
Matt

 

There are instructions posted somewhere on here i think, you may be able to search it

 

Thanks for the responce ****gy. I did do a search and only found info on the Power pack or Drag pack but not the Transformer. :-(

 

The instructions are here :

http://www.jalopyjournal.com/forum/showthread.php?t=649635&highlight=mini+mag+instructions

The issue with the mini mag is the powerpack is needed most of the time to start the engine. The mag generates its own voltage and may not do so at cranking speed. The power pac allowed it to be a reg ignition to start and then switch to the mag operation after the engine was running.

 

Thanks for the responce GMC BUBBA I had found and down loaded the instructions a few days ago. They do not mention the Transformer I have only The Power and Drag Packs. So question is still how to hook up using the Transformer.

 

I had three Power Packs -- all three were different when you opened them up.

 

Thanks Stan Back, did you ever have or seen a Transformer like pictured above? I can not find anything info on it.

 

Nobody knows about the transformer?