Garage floor paint

We just poured the slab,gotta cure 30 days or so.A commercial painter friend yold me about sherwin macropoxy 646.Supposed to be pretty tough.Has anyone had any experiance with it?Thanx,Webb.

 

Take a look at this thread........Lots of good info on floor coatings.
http://www.jalopyjournal.com/forum/showthread.php?t=667720&highlight=garage+floor+paint

 

do you new guys ever think about the 'search' feature? go look on the garage journal

 

just heard that Cosco has an epoxy floor coating kit on sale right now,,,,

 

Legacy industrial coatings
Tech week sponsor

 

Do yourself a big favor and get some inexpensive calcium chloride moisture tests and make sure your floor is well within recommended range before applying any type of coating...flooring failures have increased dramatically in the past few years as products are being produced with less VOC's.

SW does have some great industrial epoxies, I'm not sure about the one you mentioned though.

 

Sorry,I forgot about the G J board

 

I used that **** you can buy at Home Depot. Never had a problem with it, and it's cheap. I left out the flakes you can sprinkle on top and used a flour sifter to shake sand on top nice and even. Let it dry, then rolled on another coat. Still looked the same, just didn't bust my *** every time something leaked out of the car and onto it (every day).